Zum Hauptinhalt wechseln

Dremel 8200 Disassembly

Was du brauchst

  1. Dremel 8200 Disassembly, Dremel 8200 Disassembly: Schritt 1, Bild 1 von 2 Dremel 8200 Disassembly, Dremel 8200 Disassembly: Schritt 1, Bild 2 von 2
    • Take off the screw cap at the top

  2. Dremel 8200 Disassembly: Schritt 2, Bild 1 von 2 Dremel 8200 Disassembly: Schritt 2, Bild 2 von 2
    • Take out the battery

    • Remove oblong belt clip

  3. Dremel 8200 Disassembly: Schritt 4, Bild 1 von 1
    • Unscrew screws

    • Take back u clip out carefully

    • Be very careful to not injure yourself

  4. Dremel 8200 Disassembly: Schritt 6, Bild 1 von 2 Dremel 8200 Disassembly: Schritt 6, Bild 2 von 2
    • The casing should just open right up and be easily accessible

  5. Dremel 8200 Disassembly: Schritt 7, Bild 1 von 1
    • You can remove the buttons except for the sliding one that adjusts the speed

  6. Dremel 8200 Disassembly: Schritt 8, Bild 1 von 2 Dremel 8200 Disassembly: Schritt 8, Bild 2 von 2
    • You can take the motor out first and it will be a little hard to do so

    • Work your way down and take out each successive circuit board

    • The last thing to be out should be the sliding speed adjustment and the button for that should fall right out

Abschluss

To reassemble your device, follow these instructions in reverse order.

3 weitere Nutzer:innen haben diese Anleitung absolviert.

2 Kommentare

It will be handy to have either a can of compressed air or an air directional nozzle on your compressor. Be careful of the circuits and small parts that can blow away. You'll be amazed how even with a maintenance schedule, how much dirt will be on the motor fins

m. D. w. - Antwort

How do you replace just the bearing in this assembly?

Andre Da Silva - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 1

Letzte 7 Tage: 6

Letzte 30 Tage: 31

Insgesamt: 3,492