Zum Hauptinhalt wechseln

DualShock 4 Plastic Shell Replacement

Was du brauchst

  1. DualShock 4 Plastic Shell Replacement, Plastic Shell: Schritt 1, Bild 1 von 1
    • To remove the plastic shell, use the Phillips #00 screwdriver to remove the four 6.0 mm screws securing the back of the controller.

  2. DualShock 4 Plastic Shell Replacement: Schritt 2, Bild 1 von 1
    • The plastic shell is held in place by little plastic tabs that snap together.

    • Wedge the plastic opening tool between the shell and the controller and carefully pry off the plastic.

    • Take your time on this step. You do not want to break any plastic pieces.

  3. DualShock 4 Plastic Shell Replacement: Schritt 3, Bild 1 von 1
    • Either re-align the old plastic shell, or align a new replacement shell with the controller. The little plastic tabs that snap together should be aligned.

    • Apply pressure on the plastic housing so that it clicks together.

  4. DualShock 4 Plastic Shell Replacement: Schritt 4, Bild 1 von 1
    • Using the Phillips #00 screwdriver, replace and tighten the four 6.0 mm screws on the back of the controller.

Abschluss

To reassemble your device, follow these instructions in reverse order.

32 weitere Nutzer:innen haben diese Anleitung absolviert.

Dustin

Mitglied seit: 03/12/14

1.213 Reputation

6 Anleitungen geschrieben

Team

Ein Kommentar

As of March 14, 2023, this guide has been updated! Comments regarding step procedures may no longer be relevant.

Clay Eickemeyer - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 2

Letzte 7 Tage: 25

Letzte 30 Tage: 175

Insgesamt: 65,558