Einleitung
This guide will show you how to open and replace the bin of your Dyson DC58.
-
-
Locate the red lever parallel to the red trigger and on the side of the clear bin.
-
-
-
-
Push the red lever downward to open the clear bin. You may need to do this over a trash bin if there is debris in the clear bin.
-
-
-
Push the red lever downward again while pulling the clear bin away from the main body of the Dyson vacuum.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
3 weitere Nutzer:innen haben diese Anleitung absolviert.
Team
CSU Fullerton, Team 2-4, Bruce Fall 2015 Mitglied von CSU Fullerton, Team 2-4, Bruce Fall 2015
CSUF-BRUCE-F15S2G4
4 Mitglieder
19 Anleitungen geschrieben
2 Kommentare
The bin is stuck and won’t come off, although I have followed the directions above.
I think the reassembly instructions should be numbered “Step 5” and printed right below Step 4. They aren’t that easy to see.
