Zum Hauptinhalt wechseln
  1. Prior to starting, make sure vacuum is unplugged.
    • Prior to starting, make sure vacuum is unplugged.

    • Set down the vacuum so that the clear debris bin is at the base of the vacuum and the silver cyclone is at the top.

  2. Locate the blue knob in the center of the silver cyclone  labeled “Filter.”
    • Locate the blue knob in the center of the silver cyclone labeled “Filter.”

  3. Twist the blue knob clockwise. Gently lift the filter up and out of the center of the vacuum cyclone (the silver part at the top of the vacuum).
    • Twist the blue knob clockwise.

    • Gently lift the filter up and out of the center of the vacuum cyclone (the silver part at the top of the vacuum).

Abschluss

To reassemble your device, follow these instructions in reverse order.

5 weitere Nutzer haben diese Anleitung absolviert.

Team

CSU Fullerton, Team 2-4, Bruce Fall 2015 Mitglied von CSU Fullerton, Team 2-4, Bruce Fall 2015

CSUF-BRUCE-F15S2G4

4 Mitglieder

12 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzten 24 Stunden: 3

Letzten 7 Tage: 12

Letzten 30 Tage: 53

Insgesamt: 7,345