Was du brauchst
-
-
Remove 4 Phillips head screws holding on the cover plate and gasket behind it.
-
-
-
-
Attach yellow wire to the top and the black wire to bottom of switch with disconnect.
-
Tighten 1/2 nut on the pneumatic tube until snug.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
4 weitere Nutzer:innen haben diese Anleitung absolviert.