Zum Hauptinhalt wechseln

EVGA x17 Clicker Replacement

Was du brauchst

  1. EVGA x17 Clicker Replacement, Clicker: Schritt 1, Bild 1 von 1
    • Remove the mouse skates to reveal 5 screws.

  2. EVGA x17 Clicker Replacement: Schritt 2, Bild 1 von 1
    • Use a Phillips head screwdriver to remove the 5 screws that secure the bottom panel.

  3. EVGA x17 Clicker Replacement: Schritt 3, Bild 1 von 1
    • Remove the weight chamber cover.

  4. EVGA x17 Clicker Replacement: Schritt 4, Bild 1 von 1
    • Slowly slide a spudger into and around the bottom of the panel, prying until a "popping" sound is heard.

  5. EVGA x17 Clicker Replacement: Schritt 5, Bild 1 von 2 EVGA x17 Clicker Replacement: Schritt 5, Bild 2 von 2
    • Remove the 13 screws on the interior.

    • There are 2 Phillips truss-head tapping screws, large circular heads, and the 11 Phillips screws from the interior.

  6. EVGA x17 Clicker Replacement: Schritt 6, Bild 1 von 1
    • Carefully slide the middle section out.

  7. EVGA x17 Clicker Replacement: Schritt 7, Bild 1 von 1
    • Remove the two screws from each clicker.

  8. EVGA x17 Clicker Replacement: Schritt 8, Bild 1 von 1
    • Pop and slide out each clicker that needs to be replaced.

    • Clickers may need to be tugged forward in their slots to slide out.

    • Be extra careful removing clickers because the attachments are fragile.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Sydney Puett

Mitglied seit: 09/13/23

569 Reputation

3 Anleitungen geschrieben

Team

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 2

Letzte 30 Tage: 12

Insgesamt: 101