Zum Hauptinhalt wechseln

Einleitung

Use this guide to replace the battery in your Ecovacs Deebot 900 if it is malfunctioning or will not maintain a charge. The battery allows the Deebot 900 to maintain power without being plugged into a power source. It may become necessary to replace a malfunctioning battery.

Removing the battery when repairing anything inside the robot is also recommended for safety.

Ersatzteile

Keine Ersatzteile angegeben.

  1. Remove all the brushes from the Deebot.
    • Remove all the brushes from the Deebot.

  2. Using a Phillips #0 screwdriver, remove the two 12.25 mm  screws holding the battery cover in place.​
    • Using a Phillips #0 screwdriver, remove the two 12.25 mm screws holding the battery cover in place.​

  3. Remove the battery cover.
    • Remove the battery cover.

  4. Using the two white straps on the sides of the battery, gently remove the battery. ​
    • Using the two white straps on the sides of the battery, gently remove the battery. ​

    • Be careful not to rip out the battery cable.

  5. Carefully disconnect the battery cable by pulling near the connector at the bottom of the battery compartment.
    • Carefully disconnect the battery cable by pulling near the connector at the bottom of the battery compartment.

Abschluss

To reassemble your device, follow these instructions in reverse order.

3 weitere Nutzer haben diese Anleitung absolviert.

2 Kommentare

Great guide except no information on where to actually FIND a battery for this thing

Chris Staley - Antwort

Where can replacement battery packs be acquired from?

Larry Smith - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzten 24 Stunden: 17

Letzten 7 Tage: 61

Letzten 30 Tage: 250

Insgesamt: 4,312