Ecovacs Deebot 900 Front Bumper Replacement

Einleitung

The front bumper of the Ecovacs Deebot 900 is used to sense obstacles in its path. A malfunctioning front bumper can cause the Deebot to move in a circular fashion. Use this guide to remove or replace the front bumper on your Ecovacs 900 Deebot.

Was du brauchst

Schritt 1 Battery

Ecovacs Deebot 900 Front Bumper Replacement, Battery: Schritt 1, Bild 1 von 1

Remove all the brushes from the Deebot.

Bearbeiten

Schritt 2

Using a Phillips #0 screwdriver, remove the two 12.25 mm screws holding the battery cover in place.

Bearbeiten

Schritt 3

Remove the battery cover.

Bearbeiten

Anyone know where I can buy the battery for the Deebot 900. Evovacs is saying they won’t/dont sell them.

Mike - 11. Sep 2020 Antwort

Schritt 4

Using the two white straps on the sides of the battery, gently remove the battery.
Be careful not to rip out the battery cable.

Bearbeiten

Schritt 5

Carefully disconnect the battery cable by pulling near the connector at the bottom of the battery compartment.

Bearbeiten

I have two issues with these instructions.

Title is Ecovacs Deebot 900 Battery Replacement. The battery was never replaced the device was reassembled.

For battery replacement you need a battery it would be nice to have the replacement battery part number as well.

Rick Sargent - 17. Feb 2021 Antwort

I’d like some more info on part numbers, too. I have a Deebot 901 with a battery that, already after 2 years, has deteriorated significantly. Deebot 901 is also called “DE5G.10” in Europe, and it’s existing Battery back has model number ZJ1517-HFR, on which I can find almost no info, let a lone a compatible part somewhere in The Netherlands.

eymert - 10. Mär 2021