Zum Hauptinhalt wechseln

Einleitung

The Ecovacs Deebot 900 is an autonomous vacuuming robot. If the vacuum motor is not working, the Deebot will not pick up debris and will be unable to clean. Use this guide to replace the vacuum motor of your Ecovacs Deebot 900.

Ersatzteile

Keine Ersatzteile angegeben.

  1. Ecovacs Deebot 900 Vacuum Motor Replacement, Battery: Schritt 1, Bild 1 von 1
    • Remove all the brushes from the Deebot.

  2. Ecovacs Deebot 900 Vacuum Motor Replacement: Schritt 2, Bild 1 von 1
    • Using a Phillips #0 screwdriver, remove the two 12.25 mm screws holding the battery cover in place.​

  3. Ecovacs Deebot 900 Vacuum Motor Replacement: Schritt 3, Bild 1 von 1
    • Remove the battery cover.

    Anyone know where I can buy the battery for the Deebot 900. Evovacs is saying they won’t/dont sell them.

    Mike - Antwort

  4. Ecovacs Deebot 900 Vacuum Motor Replacement: Schritt 4, Bild 1 von 1
    • Using the two white straps on the sides of the battery, gently remove the battery. ​

    • Be careful not to rip out the battery cable.

  5. Ecovacs Deebot 900 Vacuum Motor Replacement: Schritt 5, Bild 1 von 1
    • Carefully disconnect the battery cable by pulling near the connector at the bottom of the battery compartment.

    I have two issues with these instructions.

    Title is Ecovacs Deebot 900 Battery Replacement. The battery was never replaced the device was reassembled.

    For battery replacement you need a battery it would be nice to have the replacement battery part number as well.

    Rick Sargent - Antwort

    I’d like some more info on part numbers, too. I have a Deebot 901 with a battery that, already after 2 years, has deteriorated significantly. Deebot 901 is also called “DE5G.10” in Europe, and it’s existing Battery back has model number ZJ1517-HFR, on which I can find almost no info, let a lone a compatible part somewhere in The Netherlands.

    eymert -

  6. Ecovacs Deebot 900 Vacuum Motor Replacement, Front Bumper: Schritt 6, Bild 1 von 2 Ecovacs Deebot 900 Vacuum Motor Replacement, Front Bumper: Schritt 6, Bild 2 von 2
    • Using a Phillips #00 screwdriver, remove the eight screws on the bottom edge of the bumper. ​

  7. Ecovacs Deebot 900 Vacuum Motor Replacement: Schritt 7, Bild 1 von 1
    • Remove the black strip on the bottom of the bumper.

  8. Ecovacs Deebot 900 Vacuum Motor Replacement: Schritt 8, Bild 1 von 2 Ecovacs Deebot 900 Vacuum Motor Replacement: Schritt 8, Bild 2 von 2
    • Carefully lift up the bumper untill it pops out of place.​

  9. Ecovacs Deebot 900 Vacuum Motor Replacement: Schritt 9, Bild 1 von 2 Ecovacs Deebot 900 Vacuum Motor Replacement: Schritt 9, Bild 2 von 2
    • Disconnect the two cables connecting the bumper to the body of the Deebot.

    • Remove the front bumper from the device.

  10. Ecovacs Deebot 900 Vacuum Motor Replacement, Bottom Case: Schritt 10, Bild 1 von 2 Ecovacs Deebot 900 Vacuum Motor Replacement, Bottom Case: Schritt 10, Bild 2 von 2
    • Using a Phillips #00 screwdriver, take out the six screws around the perimeter of the bottom case.

  11. Ecovacs Deebot 900 Vacuum Motor Replacement: Schritt 11, Bild 1 von 2 Ecovacs Deebot 900 Vacuum Motor Replacement: Schritt 11, Bild 2 von 2
    • Insert a Jimmy into the seam and work all the way around the robot.

    • Disconnect the two cables and remove the bottom case from the device.

    Thank you for your work on this guide!

    Dominick Borrego - Antwort

    Im not able to remove the bottom case. I have a Deebot 711

    rocksmum - Antwort

  12. Ecovacs Deebot 900 Vacuum Motor Replacement, Vacuum Motor: Schritt 12, Bild 1 von 1
    • Using the Phillips #00 screwdriver, remove the three screws around the laser unit.

  13. Ecovacs Deebot 900 Vacuum Motor Replacement: Schritt 13, Bild 1 von 2 Ecovacs Deebot 900 Vacuum Motor Replacement: Schritt 13, Bild 2 von 2
    • Carefully lift the laser unit off of the motor assembly​.

  14. Ecovacs Deebot 900 Vacuum Motor Replacement: Schritt 14, Bild 1 von 1
    • Remove the single screw holding the motor assembly in place using the Phillips #00 screwdriver.

  15. Ecovacs Deebot 900 Vacuum Motor Replacement: Schritt 15, Bild 1 von 2 Ecovacs Deebot 900 Vacuum Motor Replacement: Schritt 15, Bild 2 von 2
    • Disconnect the ribbon cable holding the assembly in place.

    • Be careful not to damage the cable.

  16. Ecovacs Deebot 900 Vacuum Motor Replacement: Schritt 16, Bild 1 von 1
    • Lift and remove the motor assembly out of the Deebot.​

Abschluss

To reassemble your device, follow these instructions in reverse order.

2 weitere Nutzer:innen haben diese Anleitung absolviert.

Ein Kommentar

Where can you find a replacement vacuum motor for the zoom 930?

Aaron Commons - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzten 24 Stunden: 12

Letzten 7 Tage: 92

Letzten 30 Tage: 390

Insgesamt: 6,806