Zum Hauptinhalt wechseln

Ein Vielfachmessgerät benutzen

Was du brauchst

  1. Ein Vielfachmessgerät benutzen, Stromdurchgang überprüfen: Schritt 1, Bild 1 von 1
    • Anhand einer Stromüberprüfung wird festgestellt, ob zwei Dinge elektrisch miteinander verbunden sind, d.h. ob ein elektrischer Strom ungehindert fließen kann.

    • Wenn kein Stromfluss vorhanden ist, bedeutet das, dass der Kreislauf irgendwo unterbrochen ist. Dies kann auf eine durchgebrannte Sicherung oder eine schlechte Lötverbindung hinweisen.

    • Die Überprüfung des Stroms ist eine der hilfreichsten Tests für elektronische Reparaturen.

  2. Ein Vielfachmessgerät benutzen: Schritt 2, Bild 1 von 3 Ein Vielfachmessgerät benutzen: Schritt 2, Bild 2 von 3 Ein Vielfachmessgerät benutzen: Schritt 2, Bild 3 von 3
    • Stelle sicher, dass kein elektrischer Strom durch den Stromkreis oder die Komponenten, die du testen willst, fließt. Schalte das Gerät ab, ziehe alle Stecker ab und entferne alle Batterien.

    • Stecke die schwarze Messleitung in den COM Port an deinem Multimeter.

    • Stecke die rote Messleitung in den mit einem V-Symbol bezeichneten Port ein. (In dem Fall ganz rechts).

    Why do we need to make sure that no current is running through the circuit?

    When there is another parallel branch with 24VDC power and 4-20mA output, the value of the resistance measured comes as zero. Whats the reason?

    Fraz - Antwort

    The way that a meter measures resistance is by sending a small current across the probes and then measuring the resulting voltage. So, another current will disturb your digital multimeter's (DMM) reading.

    nicO -

  3. Ein Vielfachmessgerät benutzen: Schritt 3, Bild 1 von 1
    • Schalte dein Multimeter ein und stelle den Drehschalter auf die Einstellung für die Durchgangsprüfung (zu erkennen an einem Zeichen, das wie eine Schallwelle aussieht).

    • Nicht alle Multimeter haben diesen Modus. Wenn er bei deinem fehlt, ist das auch okay! Gehe in diesem Fall einfach zu Schritt 6, für ein anderes Messverfahren.

    I want to search the resistance of gold and see if I have some

    Joel Stegner - Antwort

    What does a sound wave look like?

    Greg Janssen - Antwort

    Gold is highly conductive near zero resistance which is why they use it in conducters. Use "specific gravity" type tests or "mass spectromatry" type tests for elements.

    Sound looks like sine waves with various amplitudes and cycles per unit of time.

    MidnightWolf - Antwort

  4. Ein Vielfachmessgerät benutzen: Schritt 4, Bild 1 von 2 Ein Vielfachmessgerät benutzen: Schritt 4, Bild 2 von 2
    • Das Multimeter testet den Stromdurchgang, indem es kleine Strommengen durch eine Messleitung schickt und überprüft, ob die andere Messleitung sie empfängt.

    • Wenn die Messleitungen miteinander verbunden sind - entweder durch einen geschlossenen Kreislauf, oder durch direkte Berührung - fließt der Teststtom hindurch. Das Display zeigt den Wert 0 (oder einen Wert nahe 0) an und das Multimeter piepst. Der Strom fließt!

    • Wenn kein Teststrom erkannt wird, heißt das, dass kein Strom fließt. Das Display zeigt 1 or OL (open loop) an.

  5. Ein Vielfachmessgerät benutzen: Schritt 5, Bild 1 von 2 Ein Vielfachmessgerät benutzen: Schritt 5, Bild 2 von 2
    • Um deinen Stromdurchgangstest durchzuführen lege die Messleitungen an den Enden der Schaltung oder der Komponente an, die du testen möchtest.

    • Gleiches Phänomen wie vorher, wenn ein Strom fließt, wird 0 anzeigt und ein Piepsen ertönt.

    • Wenn 1 oder OL (open loop) gezeigt wird, ist kein Stromdurchgang vorhanden – das heißt, der Stromfluss von einer Messleitung zur anderen ist unterbrochen.

    • Normalerweise ist die Richtung des Stroms egal, d.h. es ist egal, wie man die Messleitungen anschließt. Es gibt eine Ausnahme: eine Diode ist ein Ventil für den Strom, also ist ein Strom nur in eine Richtung zu erkennen.

    • Um zu überprüfen, ob eine Diode vorhanden ist, setze die beiden Prüfspitzen vertauscht an. Wenn nun ein Strom fließt, handelt es sich um eine Diode.

  6. Ein Vielfachmessgerät benutzen, Durchgangsprüfung (Alternativmethode): Schritt 6, Bild 1 von 2 Ein Vielfachmessgerät benutzen, Durchgangsprüfung (Alternativmethode): Schritt 6, Bild 2 von 2
    • Wenn dein Vielfachmessgerät keinen speziellen Modus für die Durchlaufprüfung hat, kannst du trotzdem auf Durchgang testen.

    • Stelle dafür den Drehschalter auf den Widerstandsmodus.

    • Wenn der Messbereich bei deinem Gerät manuell eingestellt wird, dann verwende den kleinsten Wert.

    • Widerstand wird in Ohm gemessen und durch das Symbol Ω bezeichnet.

  7. Ein Vielfachmessgerät benutzen: Schritt 7, Bild 1 von 2 Ein Vielfachmessgerät benutzen: Schritt 7, Bild 2 von 2
    • In dieser Einstellung sendet das Multimeter kleine Strommengen durch eine Messleitung und misst, ob und was durch die andere Messleitung empfangen wird.

    • Wenn die Messleitungen verbunden sind - entweder durch einen Stromdurchlauf oder durch direkte Berührung, fließt der Teststrom hindurch. Das Display zeigt einen Wert von 0 (oder nahe 0, in diesem Fall 0,8). Ein sehr geringer Widerstand sagt aus, dass ein Stromdurchlauf stattfindet.

    • Wenn kein Strom festgestellt wird, heißt es, dass kein Durchlauf stattfindet. Das Display zeigt 1 an.

    You mentioned that if your meter screen displays 1 or OL

    But what happen if it shows other numbers

    Like 5.5 or somewhat?

    ddplc - Antwort

    It means you have current flowing which would indicate a good path or circuit. Also means you have a power supply connected which I think was mentioned earlier in the article to disconnect all power supplied, as in a.c., d.c. Especially in a vehicle as running tests on computer module circuits with the vehicle battery connected can damage a computer module circuit..

    Henry DeVito - Antwort

    I'm very pleased to have discovered these directions. Interestingly, I tried the two probes on different sections of a screwdriver – resistance showed very high. Is that possibly because of chrome coating on the screwdriver?

    James O'Neil - Antwort

    May not be a chrome coating at all even if it looks like it. The screw drivers "resistence" is the result of what alloys are used in the shank of the screw driver ... ie ... tin, zinc, carbon, etc.

    MidnightWolf - Antwort

  8. Ein Vielfachmessgerät benutzen: Schritt 8, Bild 1 von 2 Ein Vielfachmessgerät benutzen: Schritt 8, Bild 2 von 2
    • Um die Durchgangsprüfung zu vervollständigen, platziere je eine der Messleitungen an jedem Ende der Schaltung oder der Komponente, die du testen möchtest.

    • Es ist unerheblich, welche Messleitung wo anliegt.

    • Gleiches Phänomen wie vorher, wenn ein Strom fließt, wird 0 anzeigt.

    • Wenn 1 angezeigt wird, ist kein Stromdurchgang vorhanden - das heißt, es gibt keinen Weg für elektrischen Strom von einer Messleitung zur anderen.

    What does it mean when I first get 1 then the meter jumps to all kinds of numbers and there is no beeping?

    Choymae Huie - Antwort

    Most likely you have bad contact with whatever you are measuring.

    MidnightWolf - Antwort

  9. Ein Vielfachmessgerät benutzen, Spannung messen: Schritt 9, Bild 1 von 3 Ein Vielfachmessgerät benutzen, Spannung messen: Schritt 9, Bild 2 von 3 Ein Vielfachmessgerät benutzen, Spannung messen: Schritt 9, Bild 3 von 3
    • In den nächsten vier Schritten wird gezeigt, wie du die Spannung messen kannst.

    • Schließe die schwarze Messleitung am COM Port des Multimeters an.

    • Schließe die rote Messleitung am Port mit dem V-Symbol an.

  10. Ein Vielfachmessgerät benutzen: Schritt 10, Bild 1 von 2 Ein Vielfachmessgerät benutzen: Schritt 10, Bild 2 von 2
    • Schalte dein Vielfachmessgerät ein und stelle den Drehschalte auf den DC Spannungsmodus (erkennbar durch ein V mit einem gerade Strich oder dem Symbol⎓).

    • Alle Unterhaltungselektronikgeräte werden mit Gleichspannung betrieben. Wechselspannung, die durch die Leitungen bei dir zuhause läuft, ist beträchtlich gefährlicher und nicht Thema dieser Anleitung.

    • Vielfachmessgeräte stellen sich entweder automatisch oder manuell auf eine Spannung ein. Bei automatischer Einstellung (z.B. beim Gerät von iFixit) wird der beste Messbereich automatisch eingeschaltet. Du musst nur noch die Art der Messung wählen.

    • Bei Geräten mit manueller Bereichswahl musst du einen ungefähren Bereich für die erwartete Spannung einstellen.

    • Jede Einstellung auf der Skala zeigt die Maximalspannung an, die gemessen werden kann. Wenn du zum Beispiel erwartest mehr als 2 Volt, aber weniger als 20 zu messen, verwende die 20 Volt-Einstellung.

    • Wenn du dir nicht sicher bist, starte mit der höchsten Einstellung.

  11. Ein Vielfachmessgerät benutzen, Automatische Spannungseinstellung: Schritt 11, Bild 1 von 2 Ein Vielfachmessgerät benutzen, Automatische Spannungseinstellung: Schritt 11, Bild 2 von 2
    • Wenn der Messbereich bei deinem Multimeter manuell eingestellt wird, springe zum nächsten Schritt.

    • Platziere die rote Messleitung am Pluspol, die schwarze Messleitung am Minuspol. Das Messgerät zeigt die Spannung an.

    • Wenn die Messleitungen vertauscht angeschlossen sind, ist das kein Problem. Der Messwert wird einfach negativ angezeigt.

    • Im nächsten Schritt erfährst du, wie die Spannung bei Multimetern mit manueller Bereichswahl gemessen wird.

  12. Ein Vielfachmessgerät benutzen, Spannungsmessung bei manueller Bereichswahl: Schritt 12, Bild 1 von 3 Ein Vielfachmessgerät benutzen, Spannungsmessung bei manueller Bereichswahl: Schritt 12, Bild 2 von 3 Ein Vielfachmessgerät benutzen, Spannungsmessung bei manueller Bereichswahl: Schritt 12, Bild 3 von 3
    • In diesem Schritt erfährst du, wie die Spannung bei einem Multimeter mit manueller Bereichswahl gemessen wird.

    • Platziere die rote Messleitung am Pluspol, die schwarze Messleitung am Minuspol.

    • Wenn der eingestellte Bereich zu hoch eingestellt war, erhältst du möglicherweise keine sehr genauen Angaben. Hier zeigt das Gerät 9 Volt an. Das ist bereits aussagekräftig, aber wir können noch einen kleineren Bereich einstellen, um einen noch genaueren Wert zu bekommen.

    • Wenn du den Bereich zu klein einstellst, zeigt das Multimeter einfach 1 oder OL an, was bedeutet, dass der Wert außerhalb des Bereiches liegt. Das schadet dem Multimeter nicht - in dem Fall wird einfach ein größerer Bereich eingestellt.

    • Mit einem korrekt eingestellten Bereich, erhalten wir einen Wert von 9,42 Volt.

    • Vertauschte Messleitungen richten keinen Schaden an - in dem Fall erhältst du einfach einen negativen Wert.

  13. Ein Vielfachmessgerät benutzen, Widerstand messen: Schritt 13, Bild 1 von 3 Ein Vielfachmessgerät benutzen, Widerstand messen: Schritt 13, Bild 2 von 3 Ein Vielfachmessgerät benutzen, Widerstand messen: Schritt 13, Bild 3 von 3
    • In den nächsten drei Schritten erfährst du, wie du den Widerstand mit deinem Multimeter messen kannst.

    • Stelle zu Beginn sicher, dass kein Strom durch den Kreislauf oder das Bauteil fließt, das du überprüfen möchtest. Schalte etwa Geräte aus, stecke es aus und entferne sämtliche Akkus oder Batterien.

    • Denk daran, dass du Widerstand des gesamten Stromkreislaufs testest. Wenn du eine einzelne Komponente, wie etwa einen Widerstand, überprüfen möchtest, teste es einzeln - nicht angelötet.

    • Schließe die schwarze Messleitung am COM Port des Multimeters an.

    • Schließe die rote Messleitung am Port mit dem Ω-Symbol an. (In dem Fall die rechte Buchse).

    Be careful when testing ohms on the circuit board, the best test is to remove the part so you are only testing the part not the circuit around the part. Transistors, resistors, caps need to be removed or at best one leg of the part. One time I had a burn open resistor, then I tested the resistor with my Ohms test I got some resistor reading. This was caused by back feed in the circuit.

    John E Reese - Antwort

  14. Ein Vielfachmessgerät benutzen: Schritt 14, Bild 1 von 2 Ein Vielfachmessgerät benutzen: Schritt 14, Bild 2 von 2
    • Schalte das Multimeter an und stelle den Drehschalter auf den Widerstandsmodus.

    • Widerstand wird in Ohm gemessen und durch das Symbol Ω bezeichnet.

    • Das Multimeter von iFixit stellt den besten Messbereich automatisch ein.

    • Wenn sich dein Vielfachmessgerät nicht automatisch bei der Widerstandsmessung einstellt, musst du einen ungefähren Bereich für den erwarteten Widerstand einstellen. Wenn du unsicher bist, wähle den größten Wert.

  15. Ein Vielfachmessgerät benutzen: Schritt 15, Bild 1 von 2 Ein Vielfachmessgerät benutzen: Schritt 15, Bild 2 von 2
    • Platziere eine Messleitung auf jeder Seite des Bauteils oder an jedes Ende des Schaltkreises, den du messen möchtest.

    • Es ist unerheblich, welche Messleitung wo anliegt.

    • Wenn du ein Messgerät mit manueller Bereichswahl hast:

    • Wenn dein Multimeter einen Wert nahe Null anzeigt, ist der Bereich zu groß für eine gute Messung eingestellt. Stelle den Drehschalter auf eine kleinere Einstellung ein.

    • Wenn du den Bereich zu klein einstellst, zeigt das Multimeter einfach 1 oder OL an, was bedeutet, dass der Wert außerhalb des Bereiches liegt. Das schadet dem Multimeter nicht - in dem Fall wird einfach ein größerer Bereich eingestellt.

    • Eine andere Möglichkeit ist, dass der Stromkreis oder die Komponente keinen Stromdurchgang hat - d.h. der Widerstand ist unendlich. Wenn ein nicht durchgehender Stromkreis vorliegt, wird das Ergebnis eines Widerstandstests immer 1 oder OL sein.

Ziellinie

1003 weitere Nutzer:innen haben diese Anleitung absolviert.

Besonderer Dank geht an diese Übersetzer:innen:

en de

100%

Diese Übersetzer:innen helfen uns, die Welt zu reparieren! Wie kann ich mithelfen?
Hier starten ›

Jeff Suovanen

Mitglied seit: 08/06/13

427.002 Reputation

259 Anleitungen geschrieben

Team

iFixit Mitglied von iFixit

Staff

136 Mitglieder

16.560 Anleitungen geschrieben

132 Kommentare

EASy and helpful indeed

Trever Mazibuko - Antwort

Thank you! Never find instructions so easy to follow.

kuruvar - Antwort

Iwant to know hw to test caperstas

kapambwe sikazwe -

Great stuff!! Thank you.

warwick - Antwort

Super guide, many thanks for posting!

Alan - Antwort

Thank you. Very easy and good training

Badar Omar - Antwort

Very helpful for beginners, thanks for these clear instructions!

AndyBlaser - Antwort

great article. thanks

James Magenga - Antwort

thank you !!! for this info!!!

Sufian Hamouda - Antwort

i did not know i can do this.

jeez - Antwort

Thanks a lot this is very clear and helpful!

dillinger0893 - Antwort

Thanks Jeff. I just purchased a cheap mm. All instructions were in Chinese. Your help made sense of it all, so easy.

David Bennet - Antwort

Iwant to knw hw to test power suply

kapambwe sikazwe - Antwort

great, thank you for good description.

hzaim2001 - Antwort

Brilliant thank you

Liam Breen - Antwort

It takes an intelligent person to write simple instructions. BRAVO !

dave - Antwort

It truly does.

Shane Blanchett -

so nice Bro...Thanks a lot...

akramul haque apollo - Antwort

Love the resources on the Pro site.

Shane Blanchett - Antwort

Very good instructions

Md Kamruzzaman - Antwort

Nice guide.pl add some additional examples to have better understanding for beginners.Thank you

sugashankar - Antwort

Nice guide. Pl add some additional practical examples. Thank you.

sugashankar - Antwort

I'm doing exactly this and mine won't read any voltages, but it will read resistance. I've tested it with multiple batteries that I know work, but I only get a read of 0. What might be the problem?

Juan Partida - Antwort

Very good lesson, helped a lot. Thankyou

mark cole - Antwort

This is the best and easiest lesson on using multimeter. Thanks a lot!

Seong Lee - Antwort

Thank you, Haven't used one of these is ages; this was a great refresher!

GON Compactor - Antwort

thanks for a very easy tutorial, it is very helpful!

bonjie montaflor - Antwort

The basics. Soooo important. Well done, short and concise.

chris teter - Antwort

Nice and straightforward guide - thanks buddy.

Mel Gavin - Antwort

Most helpful thank you!

jodianderson34 - Antwort

Had multimeter for a couple years, never knew how to make it beep!

Mike Weatherl - Antwort

Thank you for these great instructions. The instructions that came with the multimeter were not helpful for a beginner, and these really helped us diagnose our problem.

Roger Lemaster - Antwort

Thank you for the great instructions. My question and the reason for my looking online for info on using a multimeter was to find out what the various resistance readings mean on a digital tester. I am checking out a defrosting element in my refrigerator and got a reading of 12 or 15 ohms. The information I was reading said a 15-100 ohms meant the element was OK, another book said if medium resistance was found it was OK.

By going online I was looking for the answer as to what is low, medium and/or high resistance ranges are.

I did enjoy your instructions, they were easy to understand.

JM - Antwort

I have used a meter for a long time. Never had instructions so clear and easy to follow. Thank you very much.

The pictures are also very clear and helpful.

Rick Lewis - Antwort

Beautifully put. I truly appreciate the lesson. I've learned something of impirtance. Thank you.

rickeybenn - Antwort

it really useful for begginer

erwin torres - Antwort

Thanks you for the lesson :)

Mark Diamond - Antwort

Hi,

das ist wirklich sehr anschaulich aufgebaut und benutzerfreundlich, vielen Dank dafür!

Wer jetzt noch genau wissen möchte wie Multimeter funktionieren und worauf Sie beim Kauf achten sollte der kann gerne noch auf https://multimeter-tester.de schauen und weiter lesen.

Ich wünsche euch noch einen schönen Abend und einen bestmöglichen Start ins neue Jahr.

LG

multimeter_tester - Antwort

Thanks you for the lesson :)

mrmannan05 - Antwort

A great introduction for a beginner like me.

Joe - Antwort

Hello . and thank you good read.

conrad - Antwort

Easy to understand...thank you

chip - Antwort

Thanks and had help me a lot

sinoncesar - Antwort

Had help me a lot. Many Thanks

sinoncesar - Antwort

Thanks, I think I've got it.

rama jama - Antwort

Simple and precise. A life saver as I couldn't find the "manual" - one page sheet. Greatful!

rudy2828 - Antwort

Wow I love this I can now read a resistor thanks keep on the good work

Adeyefa - Antwort

Great stuff this was helpful.

joel7269 - Antwort

Thanks , sometimes need too refresh with the basics.

Kurt Webster - Antwort

It is very nice demostration

Lokesha - Antwort

Sir can i get a book about basics of auto electrical and electronics or soft copy.

Lokesha - Antwort

Very informative! Easy to understand.

David Flatt - Antwort

Simple and easy thanks

kudakwashekatena - Antwort

I have been searching a tutorial on getting started with trouble shooting an automotive parasitic draw. I have no background in different types of functions of a mmeter such as continuity, voltage, and resistance, your tutorial was a must have. It gave me an understanding of just the basic terminology of the more advanced tutorials. I give it a major thumbs up, excellent tutorial thanks a million !!!!!!

camotrucker87 - Antwort

Easy to follow description. However, I am having trouble diagnosing a microwave diode. Seems I can't do that directly with a multimeter. Is that correct?

Rose - May 9, 2017

rakile - Antwort

Thank you, the instructions that came with my multi meter were clear as mud. Your mini course was very clear and concise.

t_wellman - Antwort

Thank you. This was very helpful to me. Very clear and easy to understand....

John Cascella - Antwort

Thank you so much, it is so easy to understand the way you explain.

nodzgreat - Antwort

thankyou very much.

keith - Antwort

Thanks for supportive/useful post

Suman Ponmathan - Antwort

Very Helpful.,thanks

Rey Mombay - Antwort

Excellent please give us more of the same, primarily to help with understanding of the subject matter at a basic level.

mike payne - Antwort

Excellent and elegantly simple guide.

Stewart Shackleton - Antwort

Thanks you so much for this.For me as a beginner,I didn't find difficulties in reading this but its fruitful one.

Jhed Saldavia - Antwort

thanks a million

claude.staples - Antwort

It was just awsome.Before your tutorial it just was looked like some alien device to me and now I think it's having very simple working principle. I am now pretty confident to work with it. A very big thanks.

Biswarup Majumdar - Antwort

Indeed awesome. Lots of thanks for such a generous sharing of knowledge. Be blessed

prince - Antwort

very helpful,thanks

silvester - Antwort

very simple and accurate

daniel - Antwort

Awesome thanks.. I knew you could use this for a lot of things but not this much.

Lynn Comstock - Antwort

I have a problem with my multimeter (Mastech MY74), the first thing I did was stupid, haven't read the user manual and tried it on a live socket and now it doesn't want to work. I have changed the fuses (600V, 0,4A and 10A), but it still doesn't work. Does anyone have an idea what else could have went wrong and how to test it?

Best regards

Rebius Noir - Antwort

Very useful. I liked the statements like ‘this will not harm the multimeter but will show negative reading ‘. For non science folks like me, these questions crop up often so this guide takes away the anxieties.

Ninad Kajale - Antwort

Nice article with great illustrations.

Apart from measuring DC voltage, resistance and continuity, they can also measure AC voltage, DC current, transistor and Diode checking, which I learnt from here https://circuitdigest.com/article/how-to...

merchan - Antwort

Following the KISS method of instruction!

Very well done!

JD Stewart - Antwort

marvellous explanation for a layman good luck& thanks

Ajmeet kaur - Antwort

Excellent guide. Very well explained and easy to use.

Simon Watts - Antwort

Dead easy. Very impressed.

Mark Sanders - Antwort

What to say except that you are the best !!!

Samir - Antwort

Good information. Thank

Masthan S - Antwort

Thanks a lot. :) My fear with multimeter is gone now. I am able to measure with confidence.

Jaya Saxena - Antwort

Can multimeters be used to measure salinity in water?

Ella Post - Antwort

Jeff, thanks for your step by step multimeter guide. I have also written https://bestmultimeterreviews.org/ similar article in my blog. But, your article is much better than me.

Ciffakla Notam - Antwort

Simple, easy to understand, well presented. Very helpful thanks.

Nicholas Topley - Antwort

Literally helped me passed my physics test; thank you!

KATE HUT - Antwort

Thank you very much !! Nicely explained and very easy to read with the pictures provided

larykir - Antwort

Tanks very much….Its really

Austine Taiwo - Antwort

you put a lot of effort in making this tutorial. I appreciate it.

hurshell - Antwort

Thank you. Very clear and thorough.

Choymae Huie - Antwort

Thank you for the helpful information, simple for novice to understand.

mark long - Antwort

Very helpful :) Thank you.

john schulz - Antwort

Very helpful… Thank you

Rhon - Antwort

Very helpful, thanks.

Daniel - Antwort

Cool keep up the good work and thanks

Pete Garcia - Antwort

Great for beginners, thanks

Mark - Antwort

thanks for a very easy tutorial, it is very helpful! pl add some additional examples to have better understanding for beginners.Thank you

sateesh

Challa. Sateesh - Antwort

Thank u for the precise description,very very useful for beginners.

A MAZUMDER

Arunava Mazumder - Antwort

thanku for guide!!!

sencotech khan - Antwort

I studied multimeter in my 11th grade and since then, haven’t been around these things for a long time! I was glad to go through the above instructions and as my nephew has been studying physics as well, I was able to guide him through some subjects which really gave me a good day and made my nephew happy. Thanks a lot.

Charles Brown - Antwort

thanks for this info.

daud john - Antwort

Very good explained well. Thank you.

Colm Gibson - Antwort

Exceptional directions and explanations for each step. Even an inexperienced user (such as myself) can understand and follow the instructions. So hard to find such detailed instructions for those that “want to be in the know”!! Kudos! You deserve 4+ Stars :)

Elaine Shapiro - Antwort

We thank you for the information

zenyao masilela - Antwort

I was always confused about electricity and how to test it but your instructions have given me a better understanding of it. I now have a place to go to for future reference. Thanks.

davidleithead - Antwort

thanks for the lucid description of the three phases of testing an electronic item; good job!

Jayaraman Raju - Antwort

An excellent guide. Thank you.

Kevin Dyck - Antwort

Thanks, that's helpful to me

Congrats for showing us the best way use it

Abdul Ndove - Antwort

Excellent guide Thank you!!!!

Hubulaoo kunafufafaaa - Antwort

Easy and simple to understand!! Thank you

John - Antwort

Show us the hard stuff like MX10 android box main board how to test thank u

alf - Antwort

Well. .. thank you, this is awesome

protyp Kariba - Antwort

thank you very much

Sisay alemayehu - Antwort

Well done. You've explained it in detail and was completely understandable. Tm

Todd Martens - Antwort

Good Content …………..Easy to Learn!

https://www.multimeter-uses-hindi.com

Shah Jahan - Antwort

When testing a Tweeter the multimeter reads OL on the resistance scale. What does this mean?

walkad@internode.on.net - Antwort

Very simple and easy to understand. Thank you very much for your help, now I can use a multimeter now.

Lala Hetman - Antwort

Very informative ; Thank you ?

Abdus van harte - Antwort

Thank you so much for making it so simple to follow. Because before I new what I was doing I got the all wires mixed up on my car battery. And I nearly melted my fingers to the wires. So thanks again c foley… craigfol659@gmail.com

Craig Foley - Antwort

Very good explained! Thanks.

Ove Aarstad - Antwort

easy to understand

Adriaan Cooke - Antwort

Thanks for teaching me

mokatsi phalamotse - Antwort

Thanks very helpful

Kenny Miller - Antwort

Thanks. Very Helpful

Kenny Miller - Antwort

Thank you so much easy and healpful

Goodluck Minja - Antwort

Thank you! Great how to advice for a beginner!

bobtruck7140 - Antwort

Knowing how to test continuity safely and quickly will both increase confidence near electronics — is that circuit LIVE? — and significantly decrease repair time.

nicO - Antwort

Thanks for the very detailed guide, good content and quality pictures.

AC is not dangerous, even V's aren't. Everyone must get worried about A's.

Sadly, you didn't include how to measure A (amperage or current), which always causes troubles to measure, to learn and understand.

Nicolas Pascual - Antwort

Hi how can I test a signal transmission through an ffc or fpc cable using a multimeter

silasbiwott74@gmail.com - Antwort

That was a really clear and concise tutorial. Thanks.

Just one request. Could you do ones on other capabilities of a DMM, please? For example, measuring ampage, testing doids and LEDs.

Cheers Wal

William Robertson - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 222

Letzte 7 Tage: 1,471

Letzte 30 Tage: 7,368

Insgesamt: 1,581,347