Electrical Plug Replacement

Einleitung

A common issue with electronic devices is a severed or damaged wire. Whether a dog chews through a wire, a child playing with scissors cuts a wire, or a large appliance slices through a wire, many have encountered this problem. This guide teaches how to remove a damaged plug and replace it with a new plug. The wiring in the lamp plug must be done correctly in order for the lamp to turn on after the repair is finished. This guide shows how to properly locate the "hot" and "neutral" connections.

Was du brauchst

Schritt 1 Two-Pole Plug

Electrical Plug Replacement, Two-Pole Plug: Schritt 1, Bild 1 von 2

Electrical Plug Replacement, Two-Pole Plug: Schritt 1, Bild 2 von 2

Be sure to unplug the lamp.
Locate the damaged portion of wire.
Cut the damaged plug from the lamp cord one inch below the damaged area

Übersetzen

Schritt 2

Separate the wire by gently pulling it apart.
The wire with the raised ribbing on the coating is the neutral wire.
The hot wire has a smooth coating.

Übersetzen

Schritt 3

Electrical Plug Replacement: Schritt 3, Bild 3 von 3

Strip the coating off the wire.
Expose 3/4" of the copper wire.
Twist the exposed copper wire so that there is no fraying.
Twisting the wires ensures the strongest connection and maximum safety.

Übersetzen

Schritt 4

Loosen the screw and open the replacement plug.
The silver screw is the neutral connection, and the brass screw is the hot connection.
The different connections must be determined in order to properly wire the replacement plug.

Übersetzen

Schritt 5

Electrical Plug Replacement: Schritt 5, Bild 3 von 3

Wrap the neutral wire around the neutral screw. Tighten the screw to secure the wire.
Remember the neutral wire is the wire with raised ribbing on the coating.
Wrap the hot wire around the brass screw. Tighten the screw to secure the wire.
The hot wire has a smooth coating.