Einleitung
Prerequisite only guide for Element GC-1020 back cover replacement.
Was du brauchst
-
-
Unscrew the four screws (size: 3.175mm) on the left and right side of the Element Electronics GC-1020 device using the PH#0 screwdriver.
-
-
-
-
Carefully pull the back of the device (the silver portion) apart from the rest of the device.
-
Fast fertig!
To reassemble your device, follow these instructions in reverse order.
Abschluss
To reassemble your device, follow these instructions in reverse order.
Team
University of Tampa, Team 1-4, Whiteside Fall 2015 Mitglied von University of Tampa, Team 1-4, Whiteside Fall 2015
UT-WHITESIDE-F15S1G4
4 Mitglieder
5 Anleitungen geschrieben
