Einleitung
Der Z-Knopf befindet sich oberhalb der rechten Triggertaste, hat aber die Funktion eines einfachen Knopfes.
Was du brauchst
-
-
Lege den Controller mit den Knöpfen nach unten zeigend auf eine feste Oberfläche.
-
Entferne die sechs 9,2 mm Tri-Wing Y0-Schrauben, die die Rückseite fixieren.
-
-
-
-
Hebe behutsam die Unterseite an und löse sie so von der Vorderseite.
For some reason, it was simpler to take the top half off, although it could be because it is most probably refurbished before
-
-
-
Hebe den Z-Knopf mithilfe einer Pinzette an seinem Stift aus dem Controller.
So how do you put it back in like the replacement because I have a controller I'm working a junker my Friend gave me and I'm trying to fix it the z button doesn't work here it's a pelican wireless controller it's actually not to bad bulky but not bad
-
Um den Controller wieder zusammenzusetzen, folge den Schritten in umgekehrter Reihenfolge.
Um den Controller wieder zusammenzusetzen, folge den Schritten in umgekehrter Reihenfolge.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
7 weitere Nutzer:innen haben diese Anleitung absolviert.
Besonderer Dank geht an diese Übersetzer:innen:
100%
Diese Übersetzer:innen helfen uns, die Welt zu reparieren! Wie kann ich mithelfen?
Hier starten ›
6 Kommentare
My z button presses down and makes the click, but it does not actually send any input to the controller. How do you fix this?
So how do you put it back in like the replacement because I have a controller I'm working with a junker my Friend gave me and I'm trying to fix it the z button doesn't work here is a pic
My bad no pic it's a pelican wireless controller
Does that silver bar on the bottom of the Z button supposed to be there? My Z button does not have that, is it important for the button to have that?
Does anyone know where to buy the actual button for the Z button? I can’t seem to find one where the pins are further apart up top and closer together towards the bottom of the button. I only see the opposite.