Einleitung
If the Passport Max2's lens gets cracked or damaged, this guide will communicate how to replace it.
Was du brauchst
-
-
Inser the flat end of a spudger into one of the two notches and pry off the case.
-
-
-
Slide the spudger around the perimeter of the radar housing until the case separates.
-
-
-
-
Remove the four 9mm Phillips #1 screws from the bottom of the radar.
-
Remove the bottom case.
-
-
-
Gently spread apart the thin silver frame that wraps around the device and remove the dark purple lens.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.