Einleitung

The Eton FRX3 uses a single internal, rechargeable nickel-metal hydride battery. Unfortunately, this battery may not last forever and will slowly lose it's abbility to hold charge over time. But luckily, swapping it out for a brand new one doesn't even require a screwdriver!

  1. Pull the plastic tab on the battery compartment cover panel to loosen it, then pull the panel off.
    • Pull the plastic tab on the battery compartment cover panel to loosen it, then pull the panel off.

  2. Kostenloser Versand für alle Bestellungen über 100 $ oder mit einem Pro Tech Toolkit!

    Schau dich im Store um
  3. Disconnect the battery pack wires from the device and remove the battery pack.
    • Disconnect the battery pack wires from the device and remove the battery pack.

Abschluss

To reassemble your device, follow these instructions in the reverse order.

Ein weiterer Nutzer hat diese Anleitung absolviert.

Kenneth Sills

Mitglied seit: 10.02.2016

726 Reputation

6 Anleitungen geschrieben

Team

USF Tampa, Team 1-6, Nance Spring 2016 Mitglied von USF Tampa, Team 1-6, Nance Spring 2016

USFT-NANCE-S16S1G6

4 Mitglieder

13 Anleitungen geschrieben

My question is where can you find an FRX3 replacement battery?

jalwitt - Antwort

Hey mate, you can buy the battery packs from a number of sources. Here's the link to one of those sources https://www.amazon.com/HQRP-FR200-BAT-3A...

zakk -

is it ok to replace it with a higher capacity lithium battery?

troydeleon - Antwort

As long as the specifications match, that should be fine. Just be careful when swapping out components in circuits, as it can potentially destroy the device if they're incompatible!

Kenneth Sills -

Statistik anzeigen:

Letzte 24 Stunden: 1

Letzte 7 Tage: 7

Letzte 30 Tage: 33

Insgesamt: 1,647