Einleitung
If you determine that your vacuum is no longer picking up debris, this guide will help you to replace the wash screen to increase the suction.
-
-
Press the grey dust cup release button and gently pull the dust cup towards you.
-
-
-
Twist the large, black portion of the cyclone/dust cup to the right to unlock the black cyclone from the clear dust cup.
-
-
-
-
If screen is beyond washing clean or is cracked, connect new screen to cyclone and collar.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Team
Clemson, Team 2-2, Benson Fall 2014 Mitglied von Clemson, Team 2-2, Benson Fall 2014
CLEM-BENSON-F14S2G2
4 Mitglieder
18 Anleitungen geschrieben
4 Kommentare
Where do i purchase this replacement part? I can't find it anywhere.
reattaching the collar to the wash screen is NOT EASY! I am not able to do it. What is the trick here??
Nvm. Just had to use my brain. there is a small groove in the plastic cylinder of the vacuum cleaner - the screen has to go below this - so that the collar can slide into the groove.
I wish there was a video on how to reattch the collar to the wash screen
