Einleitung
Is the wheel on the remote control of your FAO Schwarz Apex 1 malfunctioning or damaged? If so, this guide will help you replace the wheel on the remote control. Fixing a faulty wheel on the remote controller does not require any tools.
Was du brauchst
-
-
Place the remote controller on a firm surface.
-
Use a JIS #1 screwdriver to unscrew the single 11 mm screw in the center of the black wheel.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Team
Appalachian State University, Team S1-G4, Menagarishvili Fall 2018 Mitglied von Appalachian State University, Team S1-G4, Menagarishvili Fall 2018
APSU-MENAGARISHVILI-F18S1G4
4 Mitglieder
5 Anleitungen geschrieben
