Zum Hauptinhalt wechseln

Fender Jazz Bass Strings Replacement

Was du brauchst

  1. Fender Jazz Bass Strings Replacement, Strings: Schritt 1, Bild 1 von 1
    • Loosen the strings by turning the tuning pegs.

  2. Fender Jazz Bass Strings Replacement: Schritt 2, Bild 1 von 1
    • Once the strings are loose, remove them from the tuning pegs.

    • If you prefer, you can also cut the strings off.

  3. Fender Jazz Bass Strings Replacement: Schritt 3, Bild 1 von 2 Fender Jazz Bass Strings Replacement: Schritt 3, Bild 2 von 2
    • Reach under the bridge to pull out the end of each string.

  4. Fender Jazz Bass Strings Replacement: Schritt 4, Bild 1 von 2 Fender Jazz Bass Strings Replacement: Schritt 4, Bild 2 von 2
    • Insert the end of the string with no knob on the bottom through the bridge first.

    • Pull each string through to the top of the neck.

  5. Fender Jazz Bass Strings Replacement: Schritt 5, Bild 1 von 1
    • Insert the strings into the indentations on the nut.

    • Wrap the strings around the tuning pegs about two times.

  6. Fender Jazz Bass Strings Replacement: Schritt 6, Bild 1 von 2 Fender Jazz Bass Strings Replacement: Schritt 6, Bild 2 von 2
    • Tighten the tuning pegs until the bass is in tune.

    • The standard tuning for a bass is E A D G.

    • You will have excess string hanging off the pegs of the bass.

Ziellinie

Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.

Team

CSU Los Angeles, Team 1-1, Briggs Spring 2022 Mitglied von CSU Los Angeles, Team 1-1, Briggs Spring 2022

CSULA-BRIGGS-S22S1G1

1 Mitglied

1 Anleitung geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 1

Letzte 7 Tage: 8

Letzte 30 Tage: 16

Insgesamt: 492