Einleitung
This guide will teach you how to fix a jammed paper-roll in your Brother PT-90 Label-Maker.
Was du brauchst
-
-
Turn your label-maker on its face. Using your thumb, press in and then upward on the fastener located on the side of your device.
-
-
-
-
Using a plastic opening tool from your iFixit tool kit, leverage the label cartridge out of your device.
-
-
-
Press the label paper back into alignment with the small holders on the right side of the label cartridge.
-
-
-
Place the label cartridge and batteries back into your device. Refasten the bottom case of the label-maker.
-
-
-
Well done! You have successfully corrected the paper-jam in your Brother PT-90 Label-Maker.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Team
University of Maine, Team 2-1, Diaz Fall 2016 Mitglied von University of Maine, Team 2-1, Diaz Fall 2016
UMAINE-DIAZ-F16S2G1
3 Mitglieder
2 Anleitungen geschrieben
