Zum Hauptinhalt wechseln

Einleitung

The bag cutter arm is plastic and therefore must be treated as such. It can break if attempted to move with too much force.

  1. Open the device cover as shown in the image.
    • Open the device cover as shown in the image.

  2. Pull on the left side of the handle to release the bar from the holder. Not much force is required for the cutter arm to come loose. If it seems stuck squeeze the main arm sides together, as shown in the second photo
    • Pull on the left side of the handle to release the bar from the holder.

    • Not much force is required for the cutter arm to come loose. If it seems stuck squeeze the main arm sides together, as shown in the second photo

Abschluss

To reassemble your device, follow these instructions in reverse order.

Team

Cal Poly, Team 34-17, Maness Spring 2016 Mitglied von Cal Poly, Team 34-17, Maness Spring 2016

CPSU-MANESS-S16S34G17

4 Mitglieder

6 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzten 24 Stunden: 0

Letzten 7 Tage: 0

Letzten 30 Tage: 2

Insgesamt: 140