Zum Hauptinhalt wechseln

Einleitung

In this guide, we will outline how to properly unhinge the rubber seal profile and replace it after cleaning or with a new seal profile.

  1. Open the drawer on the bottom side of the FoodSaver first.
    • Open the drawer on the bottom side of the FoodSaver first.

  2. Gently pull the sides of the rubber seal profile with a finger and remove it from the device.
    • Gently pull the sides of the rubber seal profile with a finger and remove it from the device.

Abschluss

To reassemble your device, follow these instructions in reverse order.

3 weitere Nutzer haben diese Anleitung absolviert.

Team

Cal Poly, Team 34-17, Maness Spring 2016 Mitglied von Cal Poly, Team 34-17, Maness Spring 2016

CPSU-MANESS-S16S34G17

4 Mitglieder

6 Anleitungen geschrieben

2 Kommentare

Does anyone else have difficulty pulling the drip tray out? I’ve released the tabs on the bottom of the unit and tried pulling on the tray. I detect some movement but it won’t come out. If I pull any harder, I’ll probably break it.

Jerry - Antwort

Who sells the parts for the Food Saver?

Bruce Carlton - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzten 24 Stunden: 1

Letzten 7 Tage: 30

Letzten 30 Tage: 118

Insgesamt: 6,448