Zum Hauptinhalt wechseln

Fosera Scandle 200 Battery Replacement

Was du brauchst

  1. Fosera Scandle 200 Battery Replacement, Motherboard Removal: Schritt 1, Bild 1 von 1
    • To open up the casing, you will need to unscrew the four Phillips #0 15mm screws which are accessible from the back.

  2. Fosera Scandle 200 Battery Replacement: Schritt 2, Bild 1 von 1
    • Gently separate the two halves of the casing.

  3. Fosera Scandle 200 Battery Replacement: Schritt 3, Bild 1 von 1
    • Disconnect the battery from the motherboard by lifting up on the white plastic tab on the top of the connection.

    • Gently pull the cord out by the white plastic adapter. Do not pull from the red and black cord.

  4. Fosera Scandle 200 Battery Replacement: Schritt 4, Bild 1 von 1
    • Unscrew the Phillips four #0 15mm screws to free the motherboard from the casing.

  5. Fosera Scandle 200 Battery Replacement: Schritt 5, Bild 1 von 1
    • Slowly pull the motherboard out of the casing. Make sure the loose battery wire doesn't get snagged.

  6. Fosera Scandle 200 Battery Replacement, Battery: Schritt 6, Bild 1 von 1
    • Remove the four #0 15mm screws to release the battery housing from the case.

  7. Fosera Scandle 200 Battery Replacement: Schritt 7, Bild 1 von 1
    • Take the battery housing and battery out of the casing.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Team

USF Tampa, Team 12-5, Blackwell Fall 2014 Mitglied von USF Tampa, Team 12-5, Blackwell Fall 2014

USFT-BLACKWELL-F14S12G5

4 Mitglieder

6 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 4

Insgesamt: 588