Fourth Generation (2011 - 2017) Honda Odyssey Engine Air Filter Replacement (2011, 2012, 2013, 2014, 2015, 2016, 2017)

Einleitung

The following instructions describe how to perform the replacement of an engine air filter on a fourth-generation Honda Odyssey. The engine air filter collects dirt and debris in order to prevent it from entering the engine and requires replacement after a certain amount of time. Before attempting this task, be sure to allow the vehicle to cool down to avoid getting burned.

Schritt 1 Engine Air Filter

Fourth Generation (2011 - 2017) Honda Odyssey Engine Air Filter Replacement, Engine Air Filter: Schritt 1, Bild 1 von 1

Pull out the hood release in the driver's footwell to pop open the hood.

Bearbeiten

Schritt 2

Release the hood latch to lift the hood.
To avoid difficulty finding the latch, search near the center of the hood.

Bearbeiten

Schritt 3

Position hood prop rod into the support hole.
Hoods are heavy and the securement of the prop rod is necessary to prevent injury.

Bearbeiten

Schritt 4

Unlatch the three clips securing the engine air filter cover. (The third clip can't be seen in the photo but is on the other side of the cover.)
Be sure to allow the vehicle to cool down before working in the engine bay.

Bearbeiten