Einleitung
This guide deomonstrates how to remove and replace the front cover of the FujiFilm FinePix XP10SE Camera in order to pretect the device.
Was du brauchst
-
-
Use a screwdriver to remove the four screws from the top and bottom of the camera. Remove the screws securing the lanyard as well.
-
Use a T5 Torx bit to secure the exterior decorative cover of the device.
-
-
Fast fertig!
To reassemble your device, follow these instructions in reverse order.
Abschluss
To reassemble your device, follow these instructions in reverse order.
Team
Pasco Hernando, Team 5-1, Prince Winter 2015 Mitglied von Pasco Hernando, Team 5-1, Prince Winter 2015
PHSC-PRINCE-W15S5G1
5 Mitglieder
10 Anleitungen geschrieben
