Einleitung

The LCD screen will often go black and remain non-responsive. This guide will take you through the steps of replacing the broken screen and installing a new one.

Remove the two screws on the right side of the camera and the two screws on the left side. Use a small #00 Phillips flat head screwdriver. Keep all the screws in a container and the two different types separate.
  • Remove the two screws on the right side of the camera and the two screws on the left side.

  • Use a small #00 Phillips flat head screwdriver.

  • Keep all the screws in a container and the two different types separate.

Kommentar hinzufügen

Remove the three screws from the bottom of the camera. You need a three-prong screw driver for two of the three screws; keep these screws separate.
  • Remove the three screws from the bottom of the camera.

  • You need a three-prong screw driver for two of the three screws; keep these screws separate.

Kommentar hinzufügen

Mac • RAM-Erweiterungssets
Beschleunigen Sie Ihren Mac. Erweitern Sie seinen Speicher.
Mac • RAM-Erweiterungssets
Get more memory out of your Mac.
Remove the back by carefully flipping it open to the right side. There will be a ribbon cable attaching the front panel to the motherboard, be sure not to tear this. There will be a ribbon cable attaching the front panel to the motherboard, be sure not to tear this.
  • Remove the back by carefully flipping it open to the right side.

  • There will be a ribbon cable attaching the front panel to the motherboard, be sure not to tear this.

Kommentar hinzufügen

Pull the LCD screen to the left slightly, lift it and flip it open to the right. There is also a ribbon cable attaching the LCD screen to the motherboard, be careful not to tear it.
  • Pull the LCD screen to the left slightly, lift it and flip it open to the right.

  • There is also a ribbon cable attaching the LCD screen to the motherboard, be careful not to tear it.

Kommentar hinzufügen

Using a small flat head screw driver, flip open the black lever to release the ribbon cable. Gently slide the cable out of the lock; the LCD screen is now free to be removed.
  • Using a small flat head screw driver, flip open the black lever to release the ribbon cable.

  • Gently slide the cable out of the lock; the LCD screen is now free to be removed.

Kommentar hinzufügen

Using your index finger, guide the cable of the new screen into place. Lock it in by pushing the black lever back down.
  • Using your index finger, guide the cable of the new screen into place. Lock it in by pushing the black lever back down.

Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

Kyle Kaczmar

Mitglied seit 10.02.2012

11 Reputation

1 Anleitung geschrieben

Team

James Madison, Team 3-4, Klein Spring 2012 Mitglied von James Madison, Team 3-4, Klein Spring 2012

JMU-KLEIN-S12S3G4

3 Mitglieder

4 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 2

Insgesamt: 633