Repariere deine Sachen Community Store

Fujifilm Finepix S1800 Shutter Button Replacement

Einleitung

Is the button to take a photo on your Fujifilm Finepix S1800 jammed or broken? This guide will show you step by step on how to replace the jammed or broken button.

Was du brauchst

  1. Fujifilm Finepix S1800 Shutter Button Replacement, Back Cover Assembly: Schritt 1, Bild 1 von 1

    • Unscrew the four 4mm screws on the left-hand side of the camera with the JIS #1 screwdriver.

    Bearbeiten

  2. Fujifilm Finepix S1800 Shutter Button Replacement: Schritt 2, Bild 1 von 1

    • Unscrew the four 4mm screws on the right-hand side of the camera with the JIS #1 screwdriver.

    Bearbeiten

  3. Fujifilm Finepix S1800 Shutter Button Replacement: Schritt 3, Bild 1 von 1

    • Unscrew the three 4mm screws on the bottom of the camera with the JIS #1 screwdriver.

    Bearbeiten

  4. Fujifilm Finepix S1800 Shutter Button Replacement: Schritt 4, Bild 1 von 2 Fujifilm Finepix S1800 Shutter Button Replacement: Schritt 4, Bild 2 von 2

    • Take the plastic opening tool and place it in the space between the top of the screen and the top of the camera.

    • The cover will pop out.

    • You may have to work the back cover from different sides to get it to pop off.

    Bearbeiten

  5. Fujifilm Finepix S1800 Shutter Button Replacement, LCD Screen: Schritt 5, Bild 1 von 2 Fujifilm Finepix S1800 Shutter Button Replacement, LCD Screen: Schritt 5, Bild 2 von 2

    • Remove the three 2 mm screws from the back cover plate with the Phillips #000 screwdriver.

    • Gently lift the back cover away from the device.

    • Do not pull or yank free. The LCD screen is connected to the motherboard via a small ribbon cable.

    Bearbeiten

  7. Fujifilm Finepix S1800 Shutter Button Replacement: Schritt 6, Bild 1 von 1

    • Move the lever to disconnect the ribbon cable from the circuit board.

    • Do not rip the fragile micro ribbon cable.

    Bearbeiten

  8. Fujifilm Finepix S1800 Shutter Button Replacement: Schritt 7, Bild 1 von 1

    • Gently remove the LCD screen.

    • Do not touch the screen directly.

    Bearbeiten

  9. Fujifilm Finepix S1800 Shutter Button Replacement, Top Cover: Schritt 8, Bild 1 von 1

    • Lift the flash.

    • Remove the two 4 mm screws from the top of the camera with the JIS #1 screwdriver.

    Bearbeiten

  10. Fujifilm Finepix S1800 Shutter Button Replacement: Schritt 9, Bild 1 von 2 Fujifilm Finepix S1800 Shutter Button Replacement: Schritt 9, Bild 2 von 2

    • Remove the 4 mm screws from the left and right sides of the camera with the JIS #1 screwdriver.

    Bearbeiten

  11. Fujifilm Finepix S1800 Shutter Button Replacement: Schritt 10, Bild 1 von 2 Fujifilm Finepix S1800 Shutter Button Replacement: Schritt 10, Bild 2 von 2

    • Switch the lever to disconnect the micro strip that connects the top plate.

    • Do not rip the micro strip.

    Bearbeiten

    The second photo is after the top cover is removed. I’m repairing a s1600. The lens is stuck. But this guide and inside looks almost 100% the same as my s1600. Only thing is: i can’t remove the top cover. Removed all the same screws but the only difference is the lcd has no screws. Anyway the only screws I haven’t removed are the once inside the battery case (the 2 extra in the flash, not done here are also removed) Anyway the topcover looks stuck. And i’m going to try a plastic prying tool. The battery screws are very short. Maybe they are the problem but they look like they only hold the spring bumpers for battery. It must be difficult to put these bumpers back. But I must say I did 1. And the bumper is not falling out. So try those 3 screws first and then pry open the top.

    Rogier Keller - Antwort

  12. Fujifilm Finepix S1800 Shutter Button Replacement: Schritt 11, Bild 1 von 1

    • Remove the top cover.

    Bearbeiten

  13. Fujifilm Finepix S1800 Shutter Button Replacement, Shutter Button: Schritt 12, Bild 1 von 1

    • Remove the two 2 mm screws underneath the plate with the Phillips #000 screwdriver.

    Bearbeiten

  14. Fujifilm Finepix S1800 Shutter Button Replacement: Schritt 13, Bild 1 von 2 Fujifilm Finepix S1800 Shutter Button Replacement: Schritt 13, Bild 2 von 2

    • The button should fall right out.

    Bearbeiten
Abschluss

To reassemble your device, follow these instructions in reverse order.

2 weitere Personen haben diese Anleitung absolviert.

Autor:in

mit 4 anderen Mitwirkenden

Ryan Rockford

Mitglied seit: 02/15/17

618 Reputation

5 Anleitungen geschrieben

Auszeichnungen: 10

+ 7 weitere Auszeichnungen

Team

USF Tampa, Team 8-6, Eyestone Spring 2017 Mitglied von USF Tampa, Team 8-6, Eyestone Spring 2017

USFT-EYESTONE-S17S8G6

4 Mitglieder

10 Anleitungen geschrieben

Ein Kommentar

CAUTION! Different hardware versions! Following this guide might destroy your camera!

My S1800 had LCD not screwed to the body, but glued to the back cover. At the step 4 it came off together with the cover, destroying the ribbon cable, which is really short and fragile.

AntonG - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 7

Letzte 30 Tage: 24

Insgesamt: 1,366