Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Werkzeug & Ersatzteile

Einleitung

Before attempting repairs, please take note of certain risks of receiving shock from the camera's flash capacitor. Also make sure to ground yourself before operating on or near the camera's motherboard or you might discharge static to crucial components.

Ersatzteile

Keine Ersatzteile angegeben.

  1. First, push in the lens and remove the two AA batteries. First, push in the lens and remove the two AA batteries. First, push in the lens and remove the two AA batteries.
    • First, push in the lens and remove the two AA batteries.

  2. Remove screws from bottom of camera with a small #00 Phillips Screwdriver. Then remove screws around the camera. Once all screws are removed, gently pry open the front casing carefully. Do note that there will be a spring that attaches the front casing and the main circuit board, so refrain from allowing excess tension on the spring. Once all screws are removed, gently pry open the front casing carefully. Do note that there will be a spring that attaches the front casing and the main circuit board, so refrain from allowing excess tension on the spring.
    • Remove screws from bottom of camera with a small #00 Phillips Screwdriver. Then remove screws around the camera.

    • Once all screws are removed, gently pry open the front casing carefully. Do note that there will be a spring that attaches the front casing and the main circuit board, so refrain from allowing excess tension on the spring.

  3. iPhone LCD Display Fix Kits

    Die Budgetoption, abgedeckt durch unsere lebenslange Garantie.

    Kits kaufen

    iPhone LCD Display Fix Kits

    Reduziere die Reparaturkosten, nicht die Qualität.

    Kits kaufen
  4. Locate the four screws on the lens unit by the corners and remove them to loosen the lens casing from the main frame. Make sure to keep hold of the unit screws to use for the next step. Locate the four screws on the lens unit by the corners and remove them to loosen the lens casing from the main frame. Make sure to keep hold of the unit screws to use for the next step. Locate the four screws on the lens unit by the corners and remove them to loosen the lens casing from the main frame. Make sure to keep hold of the unit screws to use for the next step.
    • Locate the four screws on the lens unit by the corners and remove them to loosen the lens casing from the main frame. Make sure to keep hold of the unit screws to use for the next step.

  5. Remove the lens unit from the main camera frame. Obtain the replacement part to perform the replacement operation. Obtain the replacement part to perform the replacement operation.
    • Remove the lens unit from the main camera frame.

    • Obtain the replacement part to perform the replacement operation.

Abschluss

To reassemble your device, follow these instructions in reverse order.

4 weitere Nutzer haben diese Anleitung absolviert.

Boyang Wu

Mitglied seit: 02.10.2012

725 Reputation

5 Anleitungen geschrieben

Team

USF Tampa, Team 4-1, Meier Fall 2015 Mitglied von USF Tampa, Team 4-1, Meier Fall 2015

USFT-MEIER-F15S4G1

4 Mitglieder

6 Anleitungen geschrieben

the lens covers on my lens broke (the small black pieces that cover the lenses) and i am unable to put back on, will this affect my camera and pictures because of the ex poser?

marisabellares - Antwort

When I dropped my instax mini 8, none of the lense pieces broke, they just fell apart, I just need to puzzle them back together. Can you make a tutorial to put the yellow and black parts in the lense back together?

Julia Tyler - Antwort

My daughter dropped her camera and the round, hard plastic part that goes over the lens fell out along with a black piece that has four prongs. There is also a spring attached at a section that would look like 4-5 o'clock if looking at the camera head on. I am not sure where the other end of spring attaches to. Please help

Mike Rutledge - Antwort

I too am having the same problem as the people in the posts above. Is there a solution somewhere? Thanks

Toby Gilling - Antwort

I followed this tutorial but when I initally took the case apart a small rectangular piece fell out and I'm not sure where it should go. The piece has a hole which is set to one side, and a slight groove and arch. I can't see the piece on any of the tutorials. Can anyone help? Thanks

Nicola Jaye - Antwort

Kommentar hinzufügen

Statistik anzeigen:

Letzten 24 Stunden: 23

Letzten 7 Tage: 89

Letzten 30 Tage: 579

Insgesamt: 37,960