Was du brauchst
-
-
Go to kisslicer
-
go to style
-
Adjust the infill density
-
Adjust Infill extrusion width and Infill style
-
-
-
Open kisslicer
-
Increase the skin thickness
-
skin thickness=Extrusion width *no of loops
-
-
-
-
Go to control in machine menu
-
Click Temperature
-
Go to nozzle 1 and and increase the temperature by 5 degree
-
-
-
Go to main menu
-
If you Rotate the knob in anti clock wise direction, the speed will be decreasing.
-
Decrease the speed by 20%
-
Fast fertig!
To reassemble your device, follow these instructions in reverse order.
Abschluss
To reassemble your device, follow these instructions in reverse order.
