Einleitung
In this guide, you will learn how to completely take apart a Galaxy J3 Prime and put it back together again.
A video is also available for additional help.
Was du brauchst
Einführungsvideo
-
-
Heat up the screen to loosen the adhesive.
-
You can use a iOpener or a hair drier, but make sure you don't get the phone too hot.
-
-
-
-
Remove the plastic bracket that will be visible when you pry up the screen.
-
-
-
Remove the screws on the back of the phone frame that are holding the housing of the phone together.
-
-
-
Now that all of the screws have been removed, pull up the frame with a screwdriver or spudger.
-
Be gentle so you don't break anything.
-
-
-
Disconnect the metal flex cable from the charging port.
-
Remove the Motherboard from the housing.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
9 weitere Nutzer:innen haben diese Anleitung absolviert.
3 Kommentare
great guide, this really helped
thanks for your help, this has really helped
Best guide for a J3 out there professional and easy to follow
