Zum Hauptinhalt wechseln

Game Boy Advance Bildschirm Austausch

Was du brauchst

Einführungsvideo

  1. Game Boy Advance Bildschirm Austausch, Game Boy Advance Teardown: Schritt 1, Bild 1 von 3 Game Boy Advance Bildschirm Austausch, Game Boy Advance Teardown: Schritt 1, Bild 2 von 3 Game Boy Advance Bildschirm Austausch, Game Boy Advance Teardown: Schritt 1, Bild 3 von 3
    • Drücke die Klinke am Akkudeckel nach unten und ziehe ihn heraus.

  2. Game Boy Advance Bildschirm Austausch: Schritt 2, Bild 1 von 1
    • Die Rückabdeckung ist mit sechs Y1 TriWing Schrauben befestigt. Drehe sie heraus.

  3. Game Boy Advance Bildschirm Austausch: Schritt 3, Bild 1 von 1
    • Unten befindet sich noch eine Kreuzschlitzschraube #1 die herausgedreht werden muss.

  4. Game Boy Advance Bildschirm Austausch: Schritt 4, Bild 1 von 1
    • Halte das Vorderteil mit einer Hand fest und ziehe die Rückabdeckung mit der anderen Hand ab.

    • Achte auf den rechten und den linken Auslöser, die rechte und linke Abdeckung und den Einschaltknopf. Sie können dabei heraus fallen.

  5. Game Boy Advance Bildschirm Austausch: Schritt 5, Bild 1 von 2 Game Boy Advance Bildschirm Austausch: Schritt 5, Bild 2 von 2
    • Ziehe den rechten und linken Steuerknopf hoch und entferne beide vom Gerät.

    • Ziehe genauso die Seitenabdeckungen ab.

    • Nur bei verklemmten Tasten: setze die Tasten korrekt ein. Die meisten Störungen entstehen durch falsch sitzende oder klemmenden Taste.

  6. Game Boy Advance Bildschirm Austausch: Schritt 6, Bild 1 von 2 Game Boy Advance Bildschirm Austausch: Schritt 6, Bild 2 von 2
    • Entferne die graue Einschalttaste indem du sie nach oben hebst. Ersetze sie später durch eine andere, falls nötig.

  7. Game Boy Advance Bildschirm Austausch: Schritt 7, Bild 1 von 1
    • Entferne die drei Kreuzschlitzschrauben #1 an der Platine.

    • Die letzte Schraube rechts gibt es nicht bei allen Game Boy Advance.

    some motherboards only have 2 screws holding it in place. keep this in mind if you cant find one

    Max R. - Antwort

  8. Game Boy Advance Bildschirm Austausch: Schritt 8, Bild 1 von 2 Game Boy Advance Bildschirm Austausch: Schritt 8, Bild 2 von 2
    • Ziehe die Platine vom Vorderteil hoch, hebe dabei unten an und achte darauf, dass das Flachbandkabel noch angeschlossen ist.

    • Beschädige nicht das Kabel, ziehe vorsichtig hoch.

  9. Game Boy Advance Bildschirm Austausch: Schritt 9, Bild 1 von 3 Game Boy Advance Bildschirm Austausch: Schritt 9, Bild 2 von 3 Game Boy Advance Bildschirm Austausch: Schritt 9, Bild 3 von 3
    • Entferne die Gummiabdeckungen aus ihrem Sitz.

    • Entferne die Tasten und das Steuerkreuz mit der Hand oder einer Pinzette.

  10. Game Boy Advance Bildschirm Austausch: Schritt 10, Bild 1 von 3 Game Boy Advance Bildschirm Austausch: Schritt 10, Bild 2 von 3 Game Boy Advance Bildschirm Austausch: Schritt 10, Bild 3 von 3
    • Entsperre den LCD Stecker indem du die beiden grauen Laschen an den Seiten mit einem Spudger/Fingernagel/Pinzette in Richtung Oberkante der Platine ziehst.

    • Wenn er entsperrt ist sollte das Flachbandkabel zum LCD leicht herauskommen und kann mit den Fingern oder der Pinzette gelöst werden.

    Guide does not indicate that the ribbon cable port should be UNLATCHED before attempting to remove the ribbon cable, I strongly suggest revising this as someone unfamiliar with these style of ports may assume that the ribbon cable is a compression fit and just needs to be "pulled" free of the port.

    This is a terrible idea that will potentially result in tearing the ribbon! Please consider revising guide to add a step to indicate the proper method/detail for unlatching the LCD ribbon port! Thanks :)

    Ben Steel - Antwort

  11. Game Boy Advance Bildschirm Austausch: Schritt 11, Bild 1 von 3 Game Boy Advance Bildschirm Austausch: Schritt 11, Bild 2 von 3 Game Boy Advance Bildschirm Austausch: Schritt 11, Bild 3 von 3
    • Hebe das LCD mit einem Spudger aus dem Vorderteil. Setze den Spudger direkt in den Spalt links vom Steuerkreuz.

    • Der Bildschirm und das Vorderteil sind mit einem schwarzen Band verklebt. Du musst es sorgfältig entfernen, sonst reißt es.

    • Du kannst ein iOpener oder einen Föhn nutzen, um an der anderen Seite des Vorderteils das schwarze Band zu lösen.

    This is a BAD place to pry on a functioning LCD. I used this exact method, slowly and carefully, and my LCD shattered.

    Instead, remove the lens (it’s worth it to sacrifice the lens adhesive to save your LCD), and gently and slowly press with a gloved thumb on a corner to push it through from the front of the Game Boy. Let the adhesive release itself, don’t force it. If the room is super quiet, you should be able to hear a faint peeling sound, even if you can’t see anything moving. That means you’re doing it right; just wait and it will release.

    trevorsklar - Antwort

    Actually you can just pry under the ribbon cable. The LCD has a metal frame there that allowed me to slowly and carefully pry from that point without (re)breaking my LCD.

    trevorsklar - Antwort

    Yep. Same thing just happened to me :(

    Robert Carlson - Antwort

  12. Game Boy Advance Bildschirm Austausch: Schritt 12, Bild 1 von 1
    • Entferne das schwarze Klebeband falls nötig.

Abschluss

Um dein Gerät wieder zusammen zu setzen folge den Schritten in umgekehrter Reihenfolge.

18 weitere Nutzer:innen haben diese Anleitung absolviert.

Besonderer Dank geht an diese Übersetzer:innen:

en de

100%

VauWeh hilft uns, die Welt in Ordnung zu bringen! Wie kann ich mithelfen?
Hier starten ›

Adam

Mitglied seit: 01/20/10

807 Reputation

5 Anleitungen geschrieben

Team

Cal Poly, Team 16-29, Maness Winter 2010 Mitglied von Cal Poly, Team 16-29, Maness Winter 2010

CPSU-MANESS-W10S16G29

5 Mitglieder

61 Anleitungen geschrieben

6 Kommentare

Doesn't say where you can get new screen !!!!??

andrew Davies - Antwort

Doesn't say where to get screen from !!!??

andrew Davies - Antwort

Do this with the Game Boy Advance SP please!

Santi12008 - Antwort

It does not say where you can get a new screen

criscaanca - Antwort

DONT DO THIS LIKE THAT!!!. The area of the screen in the space beside the D-pad is the only area where the LCD glass is completely exposed. It’s Literaly the WORST place to apply pressure, 99% chances for the LCD to break. There is a notch on the top right corner and another under the ribbon cable. Making your way from the top right to the left is far more safe.

Flyingmcintosh - Antwort

To @flyingmcintosh, this happened exactly as you said it to me. Really wish I had seen your comment first but as soon as I applied the smallest bit of pressure where they outlined I heard the crunch; really frustrated with ifixit here.

Overdrive3037 - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 16

Letzte 7 Tage: 99

Letzte 30 Tage: 495

Insgesamt: 37,696