Zum Hauptinhalt wechseln

Game Boy Color Buttons Replacement

Was du brauchst

  1. Game Boy Color Buttons Replacement, Battery: Schritt 1, Bild 1 von 2 Game Boy Color Buttons Replacement, Battery: Schritt 1, Bild 2 von 2
    • Locate the battery compartment on the back of the Game Boy Color.

    • Push down on the tab and hinge the cover downwards and outwards to remove the battery cover.

  2. Game Boy Color Buttons Replacement: Schritt 2, Bild 1 von 1
    • Remove the batteries from the battery compartment.

  3. Game Boy Color Buttons Replacement, Back Housing: Schritt 3, Bild 1 von 1
    • Using a Y1 screwdriver, remove the six screws on the back of the device as pictured. The bottom two screws are located inside of the battery compartment.

  4. Game Boy Color Buttons Replacement: Schritt 4, Bild 1 von 2 Game Boy Color Buttons Replacement: Schritt 4, Bild 2 von 2
    • Gently lift and separate the back housing from the rest of the device. Now you've got the back housing out!

  5. Game Boy Color Buttons Replacement, LCD Ribbon Cable: Schritt 5, Bild 1 von 1
    • Push up on the tabs on either side of the ribbon with a spudger.

  6. Game Boy Color Buttons Replacement: Schritt 6, Bild 1 von 1
    • Gently remove the ribbon cable from the port

  7. Game Boy Color Buttons Replacement, Motherboard: Schritt 7, Bild 1 von 2 Game Boy Color Buttons Replacement, Motherboard: Schritt 7, Bild 2 von 2
    • Using the Phillips #1 screwdriver, remove the 3 screws shown in the picture.

  8. Game Boy Color Buttons Replacement: Schritt 8, Bild 1 von 1
    • Gently lift the motherboard from the front housing.

  9. Game Boy Color Buttons Replacement, Buttons: Schritt 9, Bild 1 von 1
    • Remove the rubber backing on each button grouping.

  10. Game Boy Color Buttons Replacement: Schritt 10, Bild 1 von 1
    • Remove the original buttons from the housing.

Abschluss

To reassemble your device, follow these instructions in reverse order.

24 weitere Nutzer:innen haben diese Anleitung absolviert.

Team

Cal Poly, Team 19-47, Regan Winter 2013 Mitglied von Cal Poly, Team 19-47, Regan Winter 2013

CPSU-REGAN-W13S19G47

4 Mitglieder

56 Anleitungen geschrieben

2 Kommentare

Thank you for your information on repair of my color game boy.

just two things.

1. I had a hard time with the removal of the screws. Any tip on that would be helpful.

2. Where can I purchase replacement parts?

Thanks again for all of your help.

Ray Blasko

raymondblasko - Antwort

In the tools needed it states Y0 screwdriver, but in step 3 it says Y1 which is not the same. Which one is the correct size?

blogcraft - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 8

Letzte 7 Tage: 57

Letzte 30 Tage: 266

Insgesamt: 27,580