Zum Hauptinhalt wechseln

Einleitung

The LCD Display is the screen that displays images from the Game Boy Color. This guide details how to disassemble and install an LCD Display.

  1. Locate the battery compartment on the back of the Game Boy Color. Push down on the tab and hinge the cover downwards and outwards to remove the battery cover.
    • Locate the battery compartment on the back of the Game Boy Color.

    • Push down on the tab and hinge the cover downwards and outwards to remove the battery cover.

  2. Remove the batteries from the battery compartment.
    • Remove the batteries from the battery compartment.

  3. Using a Y1 screwdriver, remove the six screws on the back of the device as pictured.  The bottom two screws are located inside of the battery compartment.
    • Using a Y1 screwdriver, remove the six screws on the back of the device as pictured. The bottom two screws are located inside of the battery compartment.

  4. Gently lift and separate the back housing from the rest of the device.  Now you've got the back housing out! Gently lift and separate the back housing from the rest of the device.  Now you've got the back housing out!
    • Gently lift and separate the back housing from the rest of the device. Now you've got the back housing out!

  5. Push up on the tabs on either side of the ribbon with a spudger.
    • Push up on the tabs on either side of the ribbon with a spudger.

  6. Gently remove the ribbon cable from the port
    • Gently remove the ribbon cable from the port

  7. Using the Phillips #1 screwdriver, remove the 3 screws shown in the picture. Using the Phillips #1 screwdriver, remove the 3 screws shown in the picture.
    • Using the Phillips #1 screwdriver, remove the 3 screws shown in the picture.

    It’s not mentioned here, but be sure to unplug the LCD flex cable at the top of the motherboard before removing the motherboard. To do so, gently press the clips on either side of the receptacle toward the top of the Game Boy. When they are both pressed up, the orange cable will slide freely out

    Ben Perkins - Antwort

    Thanks Ben. That's a very good point. Just ripping it out will cost you a couple bucks, not to mention your Gameboy will not work until you replace that ribbon cable.

    Chris Pavlik - Antwort

  8. Gently lift the motherboard from the front housing.
    • Gently lift the motherboard from the front housing.

  9. Gently pry and lift the LCD Display from the front panel. Twisting the front casing may help gain more leverage.
    • Gently pry and lift the LCD Display from the front panel.

    • Twisting the front casing may help gain more leverage.

Abschluss

To reassemble your device, follow these instructions in reverse order.

19 weitere Nutzer haben diese Anleitung absolviert.

Ajmal Puyehgar

Mitglied seit: 18.01.2013

258 Reputation

1 Anleitung geschrieben

Team

Cal Poly, Team 19-47, Regan Winter 2013 Mitglied von Cal Poly, Team 19-47, Regan Winter 2013

CPSU-REGAN-W13S19G47

4 Mitglieder

33 Anleitungen geschrieben

I broke my screen doing this. Be really gentle!

Andrew - Antwort

Broke my screen just like the last commenter. These instructions are retarded. DON’T pry the screen from the back. Take the front cover off and PUSH it from the front. The circuity for the display is encased in the thin piece of glass all around the LCD. Prying WILL break it!

VoopTech - Antwort

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 11

Letzte 7 Tage: 46

Letzte 30 Tage: 247

Insgesamt: 27,596