Einleitung
If you need to open or replace the back cover of the GameSir X2 Type-C, use this guide. This guide provides access to the left joystick and trigger assembly. This guide is a pre-requisite for most replacements inside the housing of the device.
Was du brauchst
-
-
-
Use a straight edge to remove the rubber pad on the front of the device.
-
-
-
Use a straight edge to pry open the controller, following the seam on the controller.
-
Frag FixBot
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
2 weitere Personen haben diese Anleitung absolviert.
Team
University of Memphis, Team 1-2, Sneed Spring 2024 Mitglied von University of Memphis, Team 1-2, Sneed Spring 2024
UM-SNEED-S24S1G2
3 Mitglieder
7 Anleitungen geschrieben
