Einleitung

This guide will give you step-by-step instructions on how to quickly swap out that old battery for a new one.

Remove the five 7mm screws with H1.3 hex screwdriver.
  • Remove the five 7mm screws with H1.3 hex screwdriver.

Why is a H1.3 being used here when the screws look like TORX?

Stuart Kerr - Antwort

Use a plastic opening tool to remove the face of the device to expose the inner components.
  • Use a plastic opening tool to remove the face of the device to expose the inner components.

    • There is one metal piece at the top of the face that is loose. This is the GPS antenna which will need to be removed as well.

    • Be careful with the ribbon that connects the motherboard to the display.

Kommentar hinzufügen

  • Proceed to disconnect the ribbon from the motherboard using tweezers.

Kommentar hinzufügen

  • Using a T5 screwdriver, remove the two 5mm screws.

    • The motherboard should now move freely.

Kommentar hinzufügen

  • Another ribbon is attached to the top of the motherboard. Disconnect this ribbon.

Kommentar hinzufügen

  • Disconnect wires connecting battery to motherboard.

Kommentar hinzufügen

  • The battery is glued to the motherboard and will need pried off using the nylon spudger.

Kommentar hinzufügen

  • Now attach the new battery with adhesive and reassemble.

Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

2 weitere Nutzer haben diese Anleitung absolviert.

Victor Tanguy

Mitglied seit 26.03.2018

261 Reputation

1 Anleitung geschrieben

Team

IUPUI, Team S1-G6, Harley Spring 2018 Mitglied von IUPUI, Team S1-G6, Harley Spring 2018

IUPUI-HARLEY-S18S1G6

3 Mitglieder

2 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 29

Letzte 7 Tage: 165

Letzte 30 Tage: 672

Insgesamt: 2,114