Einleitung

This guide will walk you through the process of replacing a dead or dying battery in a Garmin Forerunner 405.

Ersatzteile

Kein Ersatzteil erforderlich.

Unscrew the four 6.35 mm Torx T5 screws securing the backing of the watch.
  • Unscrew the four 6.35 mm Torx T5 screws securing the backing of the watch.

Kommentar hinzufügen

Pull the backing off the watch.
  • Pull the backing off the watch.

Kommentar hinzufügen

Pull the battery wires out from the motherboard.
  • Pull the battery wires out from the motherboard.

Kommentar hinzufügen

Replace battery module with backing of watch.
  • Replace battery module with backing of watch.

It says "No Parts Required" in the parts list, but then says to "Replace battery module with backing of watch." Obviously a part is needed, but where can one get this from?

Dan Jansen - Antwort

Abschluss

To reassemble your device, follow these instructions in reverse order.

Kyle Kiwczak

Mitglied seit 11.09.2014

301 Reputation

3 Anleitungen geschrieben

Team

USF Sarasota-Manatee, Team 1-4, Stewart Fall 2014 Mitglied von USF Sarasota-Manatee, Team 1-4, Stewart Fall 2014

USFSM-STEWART-F14S1G4

4 Mitglieder

14 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 8

Letzte 7 Tage: 35

Letzte 30 Tage: 142

Insgesamt: 7,084