Einleitung
The tools needed are a T5 Torx screwdriver and a plastic opening tool. The battery is glued to the back of the device and connected to the motherboard with a wire.
Was du brauchst
-
-
Using a T5 Torx screwdriver, remove four 6 mm screws from the four corners of the back of the device.
-
-
-
Grip the device with your hands. Using your thumbs pull the nameplate towards yourself and off the device.
-
-
-
-
Carefully pull apart the device by opening it up on the opposite side of the nameplate.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
2 weitere Nutzer:innen haben diese Anleitung absolviert.
2 Kommentare
Would this apply to the Nuvi 2555LMT?