Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Store

Einleitung

If your power button is defective, replace the old one with the new power button.

  1. Remove the barcode sticker at the bottom of the device.
    • Remove the barcode sticker at the bottom of the device.

  2. Remove two 8.4 mm T5 screws from the bottom of the device.
    • Remove two 8.4 mm T5 screws from the bottom of the device.

  3. Using a plastic opening tool, carefully pry open the device. Open the device carefully, making sure not to damage the gold ribbon cable that connects the screen to the motherboard.
    • Using a plastic opening tool, carefully pry open the device.

    • Open the device carefully, making sure not to damage the gold ribbon cable that connects the screen to the motherboard.

  4. Remove the power button. Remove the power button.
    • Remove the power button.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Timothy

Mitglied seit: 26.01.2012

60 Reputation

3 Anleitungen geschrieben

Team

Cal Poly, Team 9-3, Regan Winter 2012 Mitglied von Cal Poly, Team 9-3, Regan Winter 2012

CPSU-REGAN-W12S9G3

5 Mitglieder

4 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzten 24 Stunden: 0

Letzten 7 Tage: 1

Letzten 30 Tage: 8

Insgesamt: 9,489