Zum Hauptinhalt wechseln

Einleitung

This guide covers the removal of the system fan. When following the keyboard instructions, there is no need to unplug it. Just fold it back to gain access to the fan.

Ersatzteile

Keine Ersatzteile angegeben.

  1. Flip the laptop over. Slide the battery release tab to the right.
    • Flip the laptop over. Slide the battery release tab to the right.

  2. Lift the battery out.
    • Lift the battery out.

  3. Remove the 5 screws holding the keyboard in place.
    • Remove the 5 screws holding the keyboard in place.

  4. Potential for device damage: When lifting the keyboard out, do not lift the keyboard up. Only fold back along the space bar edge. Potential for device damage: Do not pull the black cable by the ribbon section. Only pull it from the connector itself.
    • Potential for device damage: When lifting the keyboard out, do not lift the keyboard up. Only fold back along the space bar edge.

    • Potential for device damage: Do not pull the black cable by the ribbon section. Only pull it from the connector itself.

    • Follow the black ribbon cable to the connector and gently pull straight up.

  5. Unscrew the four captive screws. Unplug the fan from the system and pull it out. The fan unit should slide forward before coming free.
    • Unscrew the four captive screws.

    • Unplug the fan from the system and pull it out. The fan unit should slide forward before coming free.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Team

Cal Poly, Team 20-10, Maness Fall 2010 Mitglied von Cal Poly, Team 20-10, Maness Fall 2010

CPSU-MANESS-F10S20G10

3 Mitglieder

22 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzten 24 Stunden: 0

Letzten 7 Tage: 0

Letzten 30 Tage: 0

Insgesamt: 2,149