Einleitung
You are going to remove the back cover, locate the RAM, take out the RAM, and either replace it or reinstall it.
Was du brauchst
-
-
-
Identify the RAM, which is a stack of two green cards in the upper left-hand corner.
-
-
-
There are silver tabs on both sides of the ram. Simultaneously push the silver tabs outward.
-
-
-
The card pops up 20 degrees and is loose enough to remove with your hand.
-
Carefully pull the card to the right horizontally.
-
-
-
Follow the same steps for the second RAM card, which is under the one you just removed.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
Eine weitere Person hat diese Anleitung absolviert.
Team
Cal Poly, Team 21-31, Regan Fall 2010 Mitglied von Cal Poly, Team 21-31, Regan Fall 2010
CPSU-REGAN-F10S21G31
4 Mitglieder
14 Anleitungen geschrieben
