Zum Hauptinhalt wechseln

Gateway SA1 Wireless Card Replacement

Was du brauchst

  1. Gateway SA1 Wireless Card Replacement, Wireless Card: Schritt 1, Bild 1 von 1
    • The first thing you need to do is remove the panel concealing the wireless card, by taking out the screws.

  2. Gateway SA1 Wireless Card Replacement: Schritt 2, Bild 1 von 1
    • Locate the wireless card on the right side of the now removed panel.

  3. Gateway SA1 Wireless Card Replacement: Schritt 3, Bild 1 von 1
    • Remove the screws in the two possible locations.

  4. Gateway SA1 Wireless Card Replacement: Schritt 4, Bild 1 von 1
    • After removing the screws, gently pull upwards on the end of the wireless card until it is angled as shown.

  5. Gateway SA1 Wireless Card Replacement: Schritt 5, Bild 1 von 1
    • Pull the card diretly outward from its socket, all while being mindful of the connected wires.

    • Remove the wired connections by gently pulling them diretly away from the card. Please remember where each one was connected, it will be useful for reconnecting

    • Reconnect wires to new wireless card and screw back into place.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Shawn Cabral

Mitglied seit: 03/12/14

463 Reputation

4 Anleitungen geschrieben

Team

UMass Dartmouth, Team 5-4, Cichon Spring 2014 Mitglied von UMass Dartmouth, Team 5-4, Cichon Spring 2014

UMASSD-CICHON-S14S5G4

3 Mitglieder

8 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 1

Letzte 30 Tage: 4

Insgesamt: 649