Zum Hauptinhalt wechseln

GoPro Hero Lens Replacement

Was du brauchst

  1. GoPro Hero Lens Replacement, Casing: Schritt 1, Bild 1 von 1
    • Power off your GoPro before beginning disassembly.

    • Unclip the black latch to the camera case and open the case.

  2. GoPro Hero Lens Replacement: Schritt 2, Bild 1 von 1
    • Gently pry the back open by inserting a metal spudger between the case and back panel.

  3. GoPro Hero Lens Replacement: Schritt 3, Bild 1 von 1
    • Disconnect the battery from the motherboard by unplugging the red, white, and black wires from the white adapter.

  4. GoPro Hero Lens Replacement: Schritt 4, Bild 1 von 1
    • Disconnect the ribbon cable from the lens by lifting the black latch and gently pulling the ribbon cable from the socket.

  5. GoPro Hero Lens Replacement: Schritt 5, Bild 1 von 1
    • Use a Phillips screwdriver (PH000) to remove the four screws around the white plastic piece.

    • Make sure to keep track of these screws as they are very small.

  6. GoPro Hero Lens Replacement: Schritt 6, Bild 1 von 1
    • Carefully remove the motherboard and white plastic piece from the case.

  7. GoPro Hero Lens Replacement, Lens: Schritt 7, Bild 1 von 1
    • Remove the four screws from the lens.

    • These screws are smaller than the ones removed from the white plastic piece.

  8. GoPro Hero Lens Replacement: Schritt 8, Bild 1 von 1
    • Remove the lens from the case.

Abschluss

To reassemble your device, follow the instructions in reverse order.

3 weitere Nutzer:innen haben diese Anleitung absolviert.

River Drake

Mitglied seit: 04/02/15

1.023 Reputation

5 Anleitungen geschrieben

Team

Cal Poly, Team 12-2, Lancaster Spring 2015 Mitglied von Cal Poly, Team 12-2, Lancaster Spring 2015

CPSU-LANCASTER-S15S12G2

4 Mitglieder

18 Anleitungen geschrieben

Ein Kommentar

I followed this list, but I think I knocked a component off of the motherboard while I was unscrewing it. I wasn’t planning on ever putting it back together, since I have a newer GoPro camera. Luckily, the lens and the cable connecting it didn’t get damaged. Is there maybe a way to connect the lens to the Raspberry Pi Zero?

Doggo Boi - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 1

Letzte 7 Tage: 12

Letzte 30 Tage: 61

Insgesamt: 12,344