Einleitung
A guide to disassemble Google Home Mini for further repairs.
Was du brauchst
-
-
Remove the rubber bottom as per the Google Home Mini teardown guide.
-
Remove the four 7mm T6 Torx screws from the bottom.
-
-
-
-
Remove the lower half of the device.
-
-
-
Using a pair of tweezers, unlatch the Zero Insertion Force (ZIF) fastener that connects the ribbon cable to the board.
What if this breaks off. Can i direct connect power.
Where to buy it please tell please
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
12 weitere Nutzer:innen haben diese Anleitung absolviert.
2 Kommentare
How did you get the rubber base off of it?
There’s a little more explanation here