Einleitung
A guide to change Google Home Mini USB power port.
Was du brauchst
-
-
Remove the rubber bottom as per the Google Home Mini teardown guide.
-
Remove the four 7mm T6 Torx screws from the bottom.
-
-
-
Remove the lower half of the device.
-
-
-
-
Using a pair of tweezers, unlatch the Zero Insertion Force (ZIF) fastener that connects the ribbon cable to the board.
What if this breaks off. Can i direct connect power.
Where to buy it please tell please
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
9 weitere Nutzer:innen haben diese Anleitung absolviert.
Team
IUPUI, Team S1-G4, Harley Spring 2018 Mitglied von IUPUI, Team S1-G4, Harley Spring 2018
IUPUI-HARLEY-S18S1G4
7 Mitglieder
5 Anleitungen geschrieben
8 Kommentare
Where I can buy micro USB PCB ?
Would like to know this as well disapointing to have an instruction on how to replace a part, but nowere to buy it.
Has anyone had any luck buying a replacement part?
If you're able to solder, you can find micro USB ports on Digi-Key.
Forgot to confirm the pin count while mine was taken apart, but would bet it's similar to many common ports such as PN: 10118194-0001LF
Somebody know where to buy it?
