Einleitung

This guide will teach you how to replace a faulty mute button switch in your Google Home with a new one.

Ersatzteile

Kein Ersatzteil erforderlich.

  1. Removing the lid too quickly could cause you to tear the interconnect cable that attaches the base to the top of the lid.
    • Removing the lid too quickly could cause you to tear the interconnect cable that attaches the base to the top of the lid.

    • Pull off the Google Home’s magnetically attached base and set it aside.

    • Using a Torx T6 screwdriver head, unscrew the four 1.7mm Torx screws deep in the speaker recess so that you can remove the lid.

    • After all four screws are out, pop the lid off the device to open the capsule.

    Kommentar hinzufügen

  2. Carefully remove the interconnect cable using a pair of tweezers.
    • Carefully remove the interconnect cable using a pair of tweezers.

    Kommentar hinzufügen

    • Remove the ‘O-ring’ that wraps around the device holding the switch panel in place.

    Kommentar hinzufügen

    • Using a Torx T6 screwdriver head, unscrew the four black 1.7mm Torx screws.

    • Remove the panel and the mute button switch. If done correctly you should now be able to see the device’s guitar-shaped motherboard.

    Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

Gabe Hyun

Mitglied seit 17.04.2018

387 Reputation

4 Anleitungen geschrieben

Team

Cal Poly, Team S24-G11, Maness Spring 2018 Mitglied von Cal Poly, Team S24-G11, Maness Spring 2018

CPSU-MANESS-S18S24G11

4 Mitglieder

5 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 2

Letzte 7 Tage: 3

Letzte 30 Tage: 10

Insgesamt: 86