Einleitung
This is a prerequisite guide! This guide is part of an another procedure and is not meant to be used alone.
This guide shows how to remove and replace either or both front-facing selfie cameras for your Pixel 3 XL. Compared to the published front-facing camera guide, this prereq does not have the determination step.
Was du brauchst
-
-
Remove the five T3 screws securing the motherboard shield:
-
Three 4 mm long screws
-
Two 3 mm long screws
-
-
-
Remove the three 3 mm long T3 screws securing the front camera bracket.
-
-
-
-
Use the point of a spudger to carefully pry up and disconnect the cameras from their motherboard sockets.
-
-
-
Use the flat end of a spudger to pry up and loosen the camera modules from their recess.
-
To reassemble your device, follow these instructions in reverse order.
Repair didn't go as planned? Try some basic troubleshooting, or ask our Answers community for help.
To reassemble your device, follow these instructions in reverse order.
Repair didn't go as planned? Try some basic troubleshooting, or ask our Answers community for help.
