Einleitung

This guide will show you how to replace a faulty cup-holder unit. The plastic lock pieces can be difficult to fully move, so be prepared to apply a lot of force to move them.

  1. Pull the plastic lock pieces that secure the cup-holder on both sides of the stroller. Pull the plastic lock pieces that secure the cup-holder on both sides of the stroller.
    • Pull the plastic lock pieces that secure the cup-holder on both sides of the stroller.

  2. Kostenloser Versand für alle Bestellungen über 100 $ oder mit einem Pro Tech Toolkit!

    Schau dich im Store um
  3. Slide the plastic lock sticks (attached to the cup-holder) down and out of the lock on both sides.
    • Slide the plastic lock sticks (attached to the cup-holder) down and out of the lock on both sides.

  4. At this point, it is easier to lay the stroller down so that the bottom of the cup-holder faces up. Locate the black tabs on the underside of the cup-holder. Push the tabs towards the center of the cup-holder to detach it and push the cup-holder towards the top of the stroller to take it off.
    • At this point, it is easier to lay the stroller down so that the bottom of the cup-holder faces up.

    • Locate the black tabs on the underside of the cup-holder.

    • Push the tabs towards the center of the cup-holder to detach it and push the cup-holder towards the top of the stroller to take it off.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Nick Spencer

Mitglied seit: 01.10.2015

101 Reputation

1 Anleitung geschrieben

Team

Cal Poly, Team 11-3, Forte Fall 2015 Mitglied von Cal Poly, Team 11-3, Forte Fall 2015

CPSU-FORTE-F15S11G3

4 Mitglieder

2 Anleitungen geschrieben

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 6

Letzte 30 Tage: 28

Insgesamt: 1,842