Einleitung

This guide will detail the process of removing the Hard Disk Drive (HDD) from the laptop.

  1. Unclip the two latches on the bottom of the laptop. Slide the battery straight out while holding the clip open. Slide the battery straight out while holding the clip open.
    • Unclip the two latches on the bottom of the laptop.

    • Slide the battery straight out while holding the clip open.

  2. Using the Phillips #0 screwdriver, remove the 7.5mm screw from the underside of the plastic frame that holds the disc tray in place.
    • Using the Phillips #0 screwdriver, remove the 7.5mm screw from the underside of the plastic frame that holds the disc tray in place.

  3. Remove the disk tray assembly by sliding it out from the side using the blue plastic opening tool. Remove the disk tray assembly by sliding it out from the side using the blue plastic opening tool. Remove the disk tray assembly by sliding it out from the side using the blue plastic opening tool.
    • Remove the disk tray assembly by sliding it out from the side using the blue plastic opening tool.

  4. Remove all of the remaining back panel screws with a #0 Phillips head screwdriver.
    • Remove all of the remaining back panel screws with a #0 Phillips head screwdriver.

    • Remember to remove the two screws under the rubber feet.

  5. Kostenloser Versand für alle Bestellungen über 100,00 $ oder mit einem Pro Tech Toolkit!

    Schau dich im Store um
  6. Carefully use the blue plastic opening tool to pry the clam shell of the laptop apart. You may need to flip the laptop over to unlatch all of the internal clips. You may need to flip the laptop over to unlatch all of the internal clips.
    • Carefully use the blue plastic opening tool to pry the clam shell of the laptop apart.

    • You may need to flip the laptop over to unlatch all of the internal clips.

  7. Carefully pull the shell of the computer apart. Carefully pull the shell of the computer apart. Carefully pull the shell of the computer apart.
    • Carefully pull the shell of the computer apart.

  8. Using a black nylon spudger, disconnect the black connector that attaches the hard drive to the motherboard Using a black nylon spudger, disconnect the black connector that attaches the hard drive to the motherboard
    • Using a black nylon spudger, disconnect the black connector that attaches the hard drive to the motherboard

  9. Using the Phillips #0 screwdriver, unscrew the three screws holding the hard drive down to the board.
    • Using the Phillips #0 screwdriver, unscrew the three screws holding the hard drive down to the board.

  10. Remove the hard drive. Remove the hard drive. Remove the hard drive.
    • Remove the hard drive.

  11. Using the Phillips #0 screwdriver, unscrew the four screws from the holding apparatus. Using the Phillips #0 screwdriver, unscrew the four screws from the holding apparatus.
    • Using the Phillips #0 screwdriver, unscrew the four screws from the holding apparatus.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Benjamin DosSantos Jr

Mitglied seit: 20.03.2018

387 Reputation

4 Anleitungen geschrieben

Team

UMass Dartmouth, Team S3-G4, Peak Spring 2018 Mitglied von UMass Dartmouth, Team S3-G4, Peak Spring 2018

UMASSD-PEAK-S18S3G4

3 Mitglieder

6 Anleitungen geschrieben

Can you provide the HDD model number for replacement? Also the model number or description of a compatible HDD with higher capacity.

Thank You

jcoengineer - Antwort

Statistik anzeigen:

Letzte 24 Stunden: 2

Letzte 7 Tage: 11

Letzte 30 Tage: 26

Insgesamt: 231