Einleitung

Removing the keyboard takes some patience but it isn't outrageously difficult. The only tools needed for this replacement guide are the PH1 screwdriver bit and the plastic spudger. Make sure to keep the two screws that are removed in a safe place so you don't lose them. Make sure the device is off before starting this guide. Be careful to not be too aggressive with the keyboard, it does take some force to separate it from the rest of the device but try to still be as gentle as possible.

Ersatzteile

Kein Ersatzteil erforderlich.

  1. Turn the laptop over, the screws for the keyboard are in the middle and left of the device
    • Turn the laptop over, the screws for the keyboard are in the middle and left of the device

    Kommentar hinzufügen

  2. Unscrew the two 0.725 cm Screws with a PH1 screwdriver bit
    • Unscrew the two 0.725 cm Screws with a PH1 screwdriver bit

    • Make sure to put the screws in a safe place so you don't lose them

    Kommentar hinzufügen

    • Flip the laptop over and open the screen

    Kommentar hinzufügen

    • Gently use a plastic spudger to remove the plastic holder at the top of the keyboard

    Kommentar hinzufügen

    • Gently use a plastic spudger to remove the keyboard from its holders

    • Be careful as there is a wire connecting the keyboard to the laptop

    Kommentar hinzufügen

    • Carefully unclip and remove the large black wire that is connecting the keyboard to the laptop

    Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

Kirsten Harnden

Mitglied seit 13.03.2018

259 Reputation

2 Anleitungen geschrieben

Team

UMass Dartmouth, Team S4-G1, Covino Spring 2018 Mitglied von UMass Dartmouth, Team S4-G1, Covino Spring 2018

UMASSD-COVINO-S18S4G1

3 Mitglieder

5 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 3

Letzte 7 Tage: 4

Letzte 30 Tage: 11

Insgesamt: 50