Ersatzteile

Kein Ersatzteil erforderlich.

Remove one 9mm T10 Torx screw from the back of the printer lid.
  • Remove one 9mm T10 Torx screw from the back of the printer lid.

Kommentar hinzufügen

Mac RAM Kits
Speed up your Mac. Max out its memory.
Mac RAM Kits
Get more memory out of your Mac.
Press outward on the plastic tab holding the back panel in place. Press outward on the plastic tab holding the back panel in place.
  • Press outward on the plastic tab holding the back panel in place.

Kommentar hinzufügen

Pull the back panel towards you and lift it away from the rest of the printer cover. Some ribbon cables may still be inserted through the back panel. Be careful not to damage these and they should slide out easily.
  • Pull the back panel towards you and lift it away from the rest of the printer cover.

  • Some ribbon cables may still be inserted through the back panel. Be careful not to damage these and they should slide out easily.

Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

2 weitere Nutzer haben diese Anleitung absolviert.

Tim

Mitglied seit 15.01.2013

131 Reputation

4 Anleitungen geschrieben

Team

Cal Poly, Team 18-35, Regan Winter 2013 Mitglied von Cal Poly, Team 18-35, Regan Winter 2013

CPSU-REGAN-W13S18G35

5 Mitglieder

8 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 3

Letzte 30 Tage: 21

Insgesamt: 1,550