Einleitung
The panel is what holds the screen in place. Before removing the panel make sure the printer is unplugged.
Was du brauchst
-
-
-
Use the Metal Spudger from the IFIXIT Toolkit to pry the left corner of the front panel.
-
Slowly pry the front panel by sliding the Metal Spudger along the border of the front panel.
-
Fast fertig!
To reassemble your device, follow these instructions in reverse order.
Abschluss
To reassemble your device, follow these instructions in reverse order.
3 Kommentare
Is the front panel from a 5532 compatible with the Envy 5530?